Applied Materials, Inc. (NASDAQ:AMAT) Q2 2023 Earnings Conference Call May 18, 2023 4:30 PM ET
Company Participants
Michael Sullivan - Corporate Vice President
Gary Dickerson - President and Chief Executive Officer
Brice Hill - Senior Vice President and Chief Financial Officer
Conference Call Participants
Christopher Muse - Evercore ISI
Stacy Rasgon - Sanford C. Bernstein & Co.
Vivek Arya - Bank of America Merrill Lynch
Krish Sankar - TD Cowen
Atif Malik - Citigroup Inc.
Mark Lipacis - Jefferies LLC
Toshiya Hari - Goldman Sachs Group, Inc.
Harlan Sur - JPMorgan Chase & Co.
Timothy Arcuri - UBS
Joseph Quatrochi - Wells Fargo Securities, LLC
Sidney Ho - Deutsche Bank
Brian Chin - Stifel, Nicolaus & Company, Inc.
Quinn Bolton - Needham & Company, LLC
Blayne Curtis - Barclays Bank PLC
Vijay Rakesh - Mizuho Securities USA LLC
Mehdi Hosseini - Susquehanna Financial Group
Operator
Welcome to the Applied Materials Earnings Conference Call. During the presentation, all participants will be in a listen-only mode. Afterwards, you will be invited to participate in a question-and-answer session.
I would now like to turn the conference over to Michael Sullivan, Corporate Vice President. Please go ahead, sir.
Michael Sullivan
Good afternoon, everyone, and thank you for joining Applied's second quarter of fiscal 2023 earnings call. Joining me are Gary Dickerson, our President and CEO, and Brice Hill, our Chief Financial Officer.
Before we begin, I'd like to remind you that today's call contains forward-looking statements which are subject to risks and uncertainties that could cause our actual results to differ. Information concerning the risks and uncertainties is contained in Applied's most recent Form 10-Q filing with the SEC. Today's call also includes non-GAAP financial measures. Reconciliations to GAAP measures are found in today's earnings press release and in our quarterly earnings materials, which are available on the IR page of our website at appliedmaterials.com.
Before we begin, I have a calendar announcement. On July 11th, Applied plans to host a Semicon West technology breakfast from 7:30 to 9.00 a.m., Pacific Time. We plan to announce a major new platform and lead a heterogeneous integration panel featuring executives from AMD, Intel and Qualcomm along with Besi and the EV Group. You can register by visiting the events page of our IR website. There won't be a webcast, so we hope you'll join us in San Francisco.
And with that introduction, I'd like to turn the call over to Gary Dickerson.
Gary Dickerson
Thank you, Mike. Applied Materials delivered strong results in our second fiscal quarter, with revenues in the high-end of our guidance range. Across the business our teams are executing well, successfully managing a dynamic near-term environment, making progress with our longer-term strategic initiatives, and introducing enabling new products and solutions for our customers.
Despite macro headwinds, our outlook remains favorable, and we expect to outperform our markets in 2023 thanks to our balanced market exposure, our strong position at key technology inflections which is driving demand for our differentiated products, especially in metal deposition, CVD, etch, implant, thermal processing, and eBeam, and our growing service business which is increasingly subscription-based.
In my prepared remarks today, I'll cover our perspective on the market both the near-term dynamics and our longer term, secular growth thesis, how Applied is positioned to outgrow the industry this year and over the longer-term, and finally, the investments we are making to create more value for our customers and productively scale the company.
In 2023, challenging and evolving macro conditions are impacting the semiconductor industry both negatively and positively. Demand that is directly driven by consumer electronics is clearly weak, while demand driven by inflections in technology and strategic regional supply-chain investments remains robust. This contrast can be seen in our customers' investment levels. Weakness in PCs and smartphones is a key factor for memory customers who have significantly reduced their investments in 2023. Measured as a percentage of total wafer fab equipment, memory spending is tracking at its lowest level in more than a decade.
In leading-edge foundry-logic, we also have seen customers trimming their spending plans for the year. We see these changes as timing adjustments, as these companies remain fully committed to their long-term roadmaps to win the race for technology leadership in this market. Push-outs in leading-edge investments are being offset by increased strength from customers who serve the IoT, Communications, Automotive, Power, and Sensors markets.
Over the past quarter, we've revised our 2023 ICAPS forecast upwards with demand being driven by two interconnected factors. First, ICAPS customers are delivering critically enabling technology for large global inflections that will play out over the next decade. These include clean energy, electric vehicles, and industrial automation. These inflections are driving significant innovation. At Applied, we have released more than 20 major new ICAPS products, since we formed our ICAPS group four years ago.
Second, there is a clear trend towards regionalization of supply chains as countries seek to build resilient local capacity to support industry verticals that are central to their economies. We currently see around $400 billion of government incentives being deployed globally over the next five years, a significant portion of which will be directed towards ICAPS markets. While China currently leads in ICAPS spending, we see other countries increasing their investments at a higher rate. In fact, the fastest growing regions for our ICAPS business in 2023 are the U.S., Europe, and Japan.
Looking beyond 2023, our long-term growth thesis for the industry remains unchanged. Semiconductors are the foundation of the digital economy, which is driving demand and puts the industry on a path to become a $1 trillion market by the end of the decade. At the same time, chip technology complexity is increasing significantly as traditional 2D scaling slows and the industry transitions to a new PPACt playbook to drive improved performance, power, area-cost and time-to-market.
Increasing complexity means that wafer fab equipment can grow at a higher rate than semiconductor revenues and then, within equipment spending, major technology inflections are increasingly enabled by materials engineering, expanding the available market for Applied Materials.
I'll highlight a few examples of how major materials engineering inflections contribute to our growth. First, Gate-All-Around transistors are a great example of a new 3D device structure that is enabled by materials engineering in areas where Applied has leadership products including epi and selective removal. In addition, we have developed differentiated conductor etch solutions specifically for Gate-All-Around applications.
We expect shipments of our Gate-All-Around products to begin ramping in 2024 as leading customers move into high volume production. For Applied, this inflection creates an incremental opportunity of around $1 billion for every 100,000 wafer starts of capacity, and we expect to gain 5 points of transistor market share in the overall transition from FinFET to Gate-All-Around.
Second, in wiring, we are seeing significant innovation in new materials. Adoption of new low-resistance metals for contact and interconnect enabled us to grow our PVD revenues at 3x the rate of wafer fab equipment in 2022. High-speed data connectivity remains a key focus for all of our customers fueling further growth at future nodes.
Third, Applied technology is providing our customers with new tools to drive their scaling roadmap. Recently, we launched Sculpta, a breakthrough pattern-shaping technology which provides a simpler, faster, and a more cost-effective alternative to EUV double patterning. It decreases customers' capital cost by about $250 million for each layer of adoption per 100,000 wafer starts. We are already shipping repeat systems and expect this business to grow to multiple hundreds of millions of dollars of annual revenue in the next several years.
The final example is advanced packaging. While we are still in the early phases of industry adoption, this inflection is already a great growth area for us. Our packaging revenue has doubled in the past three years to over $1 billion. We have strong leadership positions in key enabling technologies including Through-Silicon-Via, micro-bumping and hybrid bonding. We believe we can double revenues again in the next few years with further adoption of 3D multi-die packaging.
The increasingly complex solutions our customers are deploying to move from one technology node to the next, are also a key growth driver for our service business. Customers are seeing value in our solutions to support their R&D, rapidly transfer and ramp new technologies, and drive device performance, yield, output and cost in high-volume manufacturing.
Our service business is on track to grow in 2023 even with lower utilization rates in certain nodes and after absorbing the impact of U.S. export control rules. More than 60% of our service revenue is generated from subscriptions in the form of long-term agreements. These agreements are growing at a faster rate than the installed base and have a high renewal rate of more than 90%.
Given our confidence in the trajectory of the industry and Applied Materials, we are taking actions and making associated investments to support our growth, accelerate our customers roadmaps and drive productivity and efficiency as the industry scales.
On May 22, we will formally announce a major strategic investment in a new high-velocity innovation platform focused on next-generation equipment and process technologies. As innovation in the industry is increasingly driven by new materials, structures and devices, our goal is to change the way we collaborate with customers, universities, suppliers and other partners to bring new manufacturing technologies to market faster and optimize the overall economic returns. We'll look forward to sharing more details next week.
Before I hand over to Brice, let me quickly summarize. While 2023 is a challenging year for the economy and areas of the semiconductor market, Applied's business performance remains resilient thanks to our broad exposure to secular trends, strong product positions at key technology inflections, and our growing service business.
Our longer-term outlook is very positive as semiconductors become a larger and more strategically important market globally, and industry trends create outsized opportunities for Applied. To position ourselves for the opportunities ahead, we are making strategic investments in R&D and infrastructure while driving improvements in productivity and speed across the organization.
Now Brice, it's over to you.
Brice Hill
Thank you, Gary. On today's call, I'll summarize our Q2 results, provide our guidance for Q3, and discuss the investment we are making in our R&D infrastructure.
Before covering the near-term, I'd like to remind you of four key points. First, the semiconductor industry is on track for secular growth, with expectations of a $1 trillion market by 2030. Second, materials engineering is increasingly critical to our customers' roadmaps. Third, Applied's broad and differentiated portfolio, market diversity and growing services business make us more resilient today than in the past and set us up to outperform our markets. And fourth, we have an efficient business model that generates strong profitability and free cash flow, which enables us to invest in growth and provide attractive shareholder returns.
In fact, in March, we signaled our confidence in the long-term growth for the semiconductor market, and in our ability to deliver the new materials and manufacturing innovations required to drive the industry. The Board of Directors approved a 23% dividend per share increase which is the largest increase in five years and supplemented our share buyback program with a new $10 billion repurchase authorization.
We believe our free cash flow can continue to grow and support increasing the dividend at an accelerated rate over the next several years which would double our previous dividend per share. As our services business grows along with our installed base of equipment, it alone produces more than enough operating profit to pay the company's dividend.
Moving now to Q2 business highlights. Our team did a great job navigating supply and schedule challenges during the quarter, enabling us to grow revenue and earnings per share on a year-over-year basis. We mitigated most of the supplier cybersecurity situation we described last quarter, and this helped us deliver higher-than-expected revenue in both Semi Systems and AGS.
Most of our businesses caught up to demand, and our lead times and inventory levels declined. Growth in our ICAPS business help to offset year-over-year declines in memory as it did in Q1 and our services business generated record revenue, growing year-over-year and offsetting headwinds created by the trade rules announced last October.
Now I'll summarize our Q2 financial results. Company revenue in Q2 was $6.63 billion, up 6% year-over-year and non-GAAP EPS was $2, up 8% year-over-year. These results were in the upper end of our guidance range and only slightly below last quarter's near-record results. Non-GAAP gross margin was flat sequentially at 46.8%, remaining resilient as we offset headwinds related to trade restrictions, inflation, supply chain and logistics. Non-GAAP OpEx rose slightly quarter-over-quarter to $1.17 billion.
Turning to the segments. Semi Systems revenue grew 12% year-over-year to $4.98 billion. Segment non-GAAP operating margin was 35.6%. AGS revenue grew 3% year-over-year to nearly $1.43 billion. In fact, this was AGS's 15th consecutive quarter of year-over-year growth. Segment non-GAAP operating margin increased sequentially to 29%. In Display, revenue was approximately flat sequentially at $168 million and segment non-GAAP operating margin increased sequentially to 12.5%.
Turning to cash flows. We generated $2.3 billion in operating cash flow during the quarter, which was nearly 35% of revenue. We produced over $2 billion in free cash flow which was nearly 31% of revenue which demonstrates the efficiency of our business model. Shareholder returns in the quarter were over $1 billion, including $219 million in dividends and $800 million in share buybacks.
Now, I'll share our guidance for Q3. We expect company revenue to be $6.15 billion, plus or minus $400 million. We expect non-GAAP EPS of $1.74, plus or minus $0.18. Within this guidance, we expect Semi Systems revenue to be around $4.5 billion, which is down nearly 5% year-over-year. We expect AGS revenue to be about $1.43 billion, which is up 1% year-over-year. Display revenue should be around $170 million. We expect Applied's non-GAAP gross margin to be about 46.3% and we expect non-GAAP operating expenses to be approximately flat sequentially at $1.17 billion. We are modeling a tax rate of 12.3%.
Finally, I'll comment on the new innovation platform Gary discussed in his remarks. We are planning to make a multibillion-dollar investment in new infrastructure over the next several years to significantly expand our capacity to collaborate more closely and productively with our customers as we develop next-generation materials, process technologies and equipment. We'll provide more details about the amount and timing next week.
What I'd like you to know today is that the investment is consistent with our company's existing long-term strategic plans. Also, the scale will depend on our ability to secure government support. While we expect our capital expenditures to be higher over the next several years, there is no change to our longer-term financial model and our strong commitment to shareholder returns.
In summary, Applied Materials is executing well and demonstrating the advantages of our broad and diverse portfolio, markets and customer base. This year demonstrates how our business has become less volatile and more resilient. We are growing year-over-year in semiconductor systems and services and generating healthy profitability. We are in a great position to invest for technology leadership and growth, generate strong free cash flow and increase shareholder returns.
Mike, please begin the Q&A.
Michael Sullivan
Thanks, Brice. To help us reach as many people as we can, please ask just one question on today's call. If you have another question, please requeue and we'll do our best to come back to you later in the session. Operator, let's please begin.
Question-and-Answer Session
Operator
[Operator Instructions] Our first question comes from the line of C.J. Muse from Evercore ISI. Your question, please.
Christopher Muse
Yes. Good afternoon. Thank you for taking the question. So I was hoping you could speak to the sustainability of spending for lagging edge in China. There are many players that I think we're all aware of, like SMIC, Huahong, Huali et cetera. But it sure sounds like there are 20, 30 emerging new players that are in their first three rounds of DC funding. And the question we get often is, how sustainable is that spending beyond 2023? So we'd love to hear the visibility that you have to their build plans and how you're thinking about that spending beyond this year? Thank you.
Brice Hill
Great. C.J., thanks for the question. We've looked into this ourselves quite in-depth. We're very bullish and the customers are bullish about the end markets that are driving the investments that are being made in China. So specifically, we've looked at the equipment that we're selling. We've looked to see that it's being installed. We've looked to see that it's actually being ramped. And that's what we do see in China. So people have asked us about, is there pre-ordering or stocking of equipment? We don't see that.
You're right, that it's mostly ICAPS and it's mostly focused on the end markets that we all know that are growing in the power markets, the video processors, the sensors and power, those types of end markets. We also think about the government incentives in China. So a lot of – there is a long tail of investors in China. They are being incentivized, but they are ramping and installing the equipment, and we don't see any unused areas.
Anything to add there, Gary?
Gary Dickerson
No. Thank you.
Michael Sullivan
Thank you, C.J.
Operator
Thank you. [Operator Instructions] And our next question comes from the line of Stacy Rasgon from Bernstein Research. Your question, please.
Stacy Rasgon
Hi, guys. Thanks for taking my question. I guess to follow-up on that, I know you said that like the non-Chinese regions are growing faster, but is that because just they're smaller, like how big, how much like even qualitatively is China as a percentage of your total ICAPS revenue? And like, how much is the China piece of it growing relative to those other regions that are growing faster?
Brice Hill
Yes. Thanks, Stacy. It is the largest country in the ICAPS space, but I think there are three other countries that are growing faster. And it's not because it's a lot small numbers. They're pretty significant. So if you think of North America, China, Europe, people will recognize a lot of the investments that are being made in the mature technologies in those spaces. So China is not the fastest grower, but they're the largest country. And when we look across the world and we look at all those investments, there are government stimulus programs that help encourage the customers to make those investments. But we believe there's real demand behind that.
When we look at utilization in the ICAPS space, we see utilization to be in a healthy range. So this looks like an ongoing trend when we think forward. If we look back to 2022, we had 40 plus percent growth rate in ICAPS. It's only accelerated this year. And our view from all the accounts is that it won't grow at the same rate. It won't accelerate at the same rate, but that demand is stable. We expect over the coming years that that market will stay about the same size.
Gary Dickerson
Yes. Stacy, this is Gary. Especially, I would say in the U.S. and Europe, when I talk to those CEOs and those companies, they're in a very strong position. And those investments that they're making will be sustainable over the next several years, and they are, as Brice said, meaningful.
Michael Sullivan
Thank you, Stacy.
Operator
Thank you. [Operator Instructions] And our next question comes from the line of Vivek Arya from Bank of America. Your question, please.
Vivek Arya
Thank you for the question. Maybe kind of two very related ones. What's your backlog in Semi Systems? And where does it get to exiting the year? And then a number of your peers have suggested that the second half of the calendar year, so essentially your Q4 and Q1 could be better than the first half. Is that similar to the trends Applied is seeing? Or what would create that difference between you and your peer group?
Brice Hill
Okay. Thanks, Vivek. First of all, backlog. We still have an elevated backlog. What we've tried to talk about last quarter and this quarter is the dynamics under that. We have caught up in most of the business groups to the underserved demand that we had from the prior year. So that's a good thing. Our lead times are returning to more normal. Having said that the backlog is still elevated, we think that's because many customers are placing orders over a longer period of time. They're planning longer in the future than they have in the past. So when you see our backlog published at the end of the year, it'll probably still be at an elevated level.
On the second half, we're not guiding the second half, but the story for Applied has been that the ICAPS business has grown so much this year that it's offset weakness in the memory market and any slowness that we've seen in the leading logic market and we expect that dynamic to continue. You can see in the next quarter that we don't have growth in the next quarter. But overall, we expect that dynamic that we've seen for the business to continue in future quarters. So we can't call that second half or even 2024 yet because the large markets of memory and leading logic are pretty exposed to macros and pretty exposed to consumer end markets. We'll just have to see how that looks for Q4 and for next year?
Michael Sullivan
Thank you, Vivek.
Operator
Thank you. [Operator Instructions] And our next question comes from the line of Krish Sankar from TD Cowen. Your question, please.
Krish Sankar
Hi. Thanks for taking the question. I had a big picture, and a quick clarification for Brice too. One is for Gary. When you look at all these leading-edge spending and all the regionalization, it seems like, is it all tied to really CHIPS Act funding or other factors in play like a permitting orders might be that's causing some relative delay in those leading-edge investments? And Brice, did you say anything about some of the China export control recovery that some of your peers have spoken about in the back half? Thank you.
Gary Dickerson
Yes. Krish, thanks for the question. On the leading-edge, there is an intense competition for leadership, so all of those companies are trying to drive their road maps as fast as they can on power performance and cost. So we certainly see that continuing to play out over the next few years. What I would say also is that the perspective that we have right now is that 3-nanometer is going to be a big node, where there's a lot of tape-outs and customer demand. So we think that's going to be pretty robust.
For Applied, we're in a really good position as our customers move to 3-nanometer. The number of steps for us go up I think to more than 20% in that transition from 5 to 3-nanometer. Again, you have this really significant competition in that leading-edge that – again, we continue to see that that's going to be sustainable going forward. And then relative to government incentives, there's also a lot of competition there. So you see every region where we do business today a significant amount of incentives that are being supplied really for leading-edge and for ICAPS. But I think that – so that's definitely true. That will be an adder for our systems and service business over the next few years. But I think the bigger factor in the leading-edge is just there is pretty significant demand and you have significant competition for leadership.
And I'll let Brice answer the next question.
Brice Hill
Thanks, Gary. And Krish, on the China export controls, we see the same thing as our peers do. We'll be able to ship to some factories in the second half that were clarified recently.
Michael Sullivan
Okay. Thank you, Krish.
Operator
Thank you. [Operator Instructions] And our next question comes from the line of Atif Malik from Citi. Your question, please.
Atif Malik
Hi. Thank you for taking my question. Gary, I have a question on your comments on Gate-All-Around. You talked about gaining 5 points of transistor share from FinFET to Gate-All-Around. My question is the share gain, is that because the TAM is growing? Or are the dollars coming out from other areas like lithography? And does that statement include contribution from Sculpta?
Gary Dickerson
Yes. Thanks for the question. So I would say Gate All Around, there's both higher process complexity of existing steps plus addition of new steps. And we've said that's again a $1 billion opportunity for Applied, and we're really in a great position because the steps that are growing, the increased complexity is in areas where we have very, very strong products and technology. And again, we're deeply engaged with every single one of those companies. So in any of those areas for deposition, selective removal, we have very good visibility relative to overall competitive positions and not just in the first generation of Gate All Around, but subsequent generations.
And so again, I think we still see the same thing relative to the size of the market and the share gains really are relative to FinFET. So what customers were spending for the – we're spending as a percentage of total transistor from FinFET to Gate All Around. That's where the 5 points of share comes from.
And then relative to the road maps going forward, what I would say is that we definitely see an increasing relative contribution in materials engineering. So if you look at certainly the transistor innovation, wiring resistance is one of the biggest issues in the whole industry. That's an area that's growing very fast. I talked about the MVP growth earlier. So again, that wiring is a really great opportunity for us. Backside power distribution will be coming. There you can get up to 30% area savings without changing the feature size and also improvements in power and performance. In the future, you'll see people stacking nanosheets for another transistor technology in future nodes. So again, more and more of those dollars are moving to materials engineering as we go forward.
Michael Sullivan
All right. Thank you, Atif.
Operator
Thank you. [Operator Instructions] And our next question comes from the line of Mark Lipacis from Jefferies. Your question, please.
Mark Lipacis
Hi. Thanks for taking my question. Gary, for you. You guys seems way ahead of the curve on ICAPS. It's been a phenomenally successful investment for you guys, it's really paying off. On these calls, you always talk about all these other investments that you made, I think you went through three, four or five of them. Which one of those has the chance to be the biggest? Is there – does one of this have a chance to be the size of ICAPS right now? How should we think about the next big driver for you guys, if you were to single out one, if you could. Thank you.
Gary Dickerson
So Mark, just – thanks for the question, but I just want to understand, are you talking about within ICAPS or are you talking beyond ICAPS.
Mark Lipacis
Beyond ICAPS, all the things that you guys are investing in right now, you guys – you made a great decision to invest heavily in ICAPS and is paying off in a major way. So that was a press on investment from my view, and I'm trying to understand like you're making a lot of investments. You talk about a lot of things that you're investing in. Of the four or five things that you talked about on the calls that you've been investing in, do any of these have the chance to be as big as ICAPS? Or what has the chance to be as close to ICAPS in terms of the amount of revenue and profitability it could deliver to Applied Materials. Thank you.
Gary Dickerson
Okay. Yes. Thanks, Mark. I would say two things. One, as customers are going forward, I mentioned this on the previous question. Materials engineering, I think if you look at the percentage of spending going forward, just really tremendous – everybody knows that 2D Moore's Law scaling is challenged. And so the innovations in – transistor innovations in wiring, innovations and memory technologies, all of those areas – and I mentioned the increase in the number of steps and the increase in complexity from one technology node to the next, we're in a really great position, again, relative to what's going to drive our customers' road maps in the future. And there's tremendous innovations that will bring there. Sculpta was one example of another way that you can achieve area scaling at a much, much lower cost with this directional etch technology and there's many material modification steps, double-digit numbers going from one technology node to the next that are growing, those are areas where we have extremely high share. And we're innovating to drive performance and power and cost for customers. So that would be one area I would say.
The other one that I'm pretty excited about longer term is packaging and all the innovation is going to happen going from system-on-chip to system and package. I think that's going to be a tremendous inflection. That's about a $1 billion business for us today. I mentioned earlier that we could see that doubling in the next few years. I think that – and there's – we have a very strong position in the served markets that we have today. We have pretty high share. And there are other areas we're focused on. We mentioned hybrid bonding as one, but there are others that we're focused on that will create really big opportunities. So that would be the other area. I think that, that whole movement to chiplets and heterogeneous integration.
Michael Sullivan
Thank you, Mark.
Operator
Thank you. [Operator Instructions] And our next question comes from the line of Toshiya Hari from Goldman Sachs. Your question, please.
Toshiya Hari
Hi. Good afternoon. Thank you so much for taking the question. Gary, I had a question on your memory business. Clearly, it's going through a pretty rough patch at the moment, consistent with industry trends. I'm curious both in terms of your AGS business as well as your systems business, at what point do you expect your memory business to recover. I know you're pretty close and you're going back and forth with CEOs and CTOs. But just curious on the timing there. And as a quick follow-up, your business in Korea in the quarter was quite strong, if I'm not mistaken. Korea, obviously over-indexed to memory. So I was hoping you could reconcile the weakness you're seeing in memory, but the strength in Korea. Thank you.
Brice Hill
Yes. Hi, Toshiya, it's Brice. I'll just say a couple of things, and Gary can add on that. So on the memory side, we do think it's at sort of historical lows. We've thought about our long-term balance of memory and logic over time. We do think the market from an equipment perspective should be about one-third memory and two-thirds logic and that two-thirds would be split between relatively evenly between ICAPS and leading-edge. So on the memory, we do think it's at a low. However, in the quarter, we monitor pricing, we monitor utilization, we monitor inventories. Those are still moving in the wrong direction in this past quarter. So it hasn't quite turned yet, but we do think with the ICAPS business growing and with an outlook, long-term outlook strong for leading-edge, we do think memory will have to turn around. It's hard to call the exact moment, but we expect that to happen. And then Korea, I think it's just good shipments in the quarter. I don't think it portends anything unique from a trend perspective. We do still see weakness in the market.
Gary Dickerson
Yes. Brice, I don't really have too much to add. Again, we do see long-term foundry-logic. We've mentioned this before, two-thirds, one-third, certainly continuing strength in the race for leadership and the leading-edge and sustainable strength in ICAPS going forward. We don't think it comes back to that two-third, one-third soon. But longer term, that's kind of where we think that's going to end up.
Michael Sullivan
Great. Thank you, Toshiya.
Operator
Thank you. [Operator Instructions] And our next question comes from the line of Harlan Sur from JPMorgan. Your question, please.
Harlan Sur
Yes. Good afternoon. Thanks for taking my question. Typically, doing periods of spending weakness, you start off with the first couple of quarters, driving a lot of customer push-outs rescheduling, cancellation activity, then that activity stabilizes and your shipments soon follow that stable trend. I know last earnings, you were still seeing quite a bit of rescheduling and push-out activity on the backlog. Has this activity stabilized?
Gary Dickerson
Hi, Harlan. Thank you. I don't think so. We still saw in this quarter, we still saw weakness in NAND, and we saw weakness as defined as push-outs on the leading-edge, and that's partly why you see our guide for the next quarter, a little bit bumpy, taking into account some of those push outs. So I think customers are still reacting to the current environment and checking the road maps and trying to optimize those road maps. And for us, just to sort of reiterate, over the course of this year, the ICAPS business has been so strong that it overcame most of that noise. The growth of ICAPS overcame most of that noise. Plus we had several business units that we're still catching up on back orders. The first part, the ICAPS strength, we expect to continue as the year goes on, as we've said, and be a important component of demand going forward. And the business units that were behind have mostly caught up with the exception of implant, where we're still working to catch up.
Michael Sullivan
Thanks, Harlan.
Operator
Thank you. [Operator Instructions] And our next question comes from the line of Timothy Arcuri from UBS. Your question, please.
Timothy Arcuri
Thanks a lot. Hi. I just kind of wanted to go back to this China lagging-edge topic. And you guys do such good demand modeling. And I'm kind of wondering what you think the underlying demand that's kind of backing all this. The kind of easy conclusion is that this just all kind of coincided with the leading-edge bands, and so they're just pivoting to pouring money into a lagging-edge. So when you think about the demand backing this, was this just demand that like wasn't being met by the U.S. and the European chip guys? I asked because EV is not new and penetration is actually pretty high in China already, and it haven't been great anyway. So that's the first part of the question. And then also, is that really like this year WFE thing? Or is it all more going to be part of next year's WFE? Thanks.
Brice Hill
Okay, great. Thanks, Tim. The second part of the question first. So we definitely think it will be a continuing trend. So we raised our expectations of demand in China during the quarter, and we raised our expectations over time from China during the quarter. And as I – I may have said in the first question, when we track fab projects in China, there's quite a number. The overall list for the globe is approximately 100 now, and there's a significant amount in China. So when it's mostly in the ICAPS space. And when we think about the end markets, I guess the perspective I have is that they are localizing as much of the supply to these ICAPS end markets as they can.
And so they are building local supply for if you think of sensors, power chips, analog chips, microcontrollers, we believe they're building out those capabilities internally, and I think there's been confirmation recently that some of the imports of those components to China have declined even though demand is growing. So our perspective is the capacity that's being put in place in China, it isn't extraordinary at this point. If you think of China trying to build a local ecosystem of capacity that matches their demand function, if you will, over time. They're not there yet. So these investments make sense if that's the goal, and we know they have government incentives to accomplish that.
Gary Dickerson
Yes, Tim, this is Gary. One other thing I would say is – and we do, as you said, a lot of modeling of each one of those vertical markets within ICAPS. We look at fab utilization, wafer starts, all of those things. The one other thing, I would say is that we look at good chips out for each one of these different factories. And so when you look at yield as another factor that's – when we look at the overall market, it's roughly in line with what we see relative to our assumptions of the growth rates in those different segments. But again, I would look at also the good chips out.
Michael Sullivan
Yes. Thank you, Tim.
Operator
Thank you. [Operator Instructions] Our next question comes from the line of Joe Quatrochi from Wells Fargo. Your question, please.
Joseph Quatrochi
Yes. Thanks for taking the question. And kind of as a follow-up to Gary's comment, I guess, how do we think about, if you were to look at like domestic China's capital intensity for mature nodes relative to maybe some of your more experienced customers, is that a multiple higher than your more experienced customers? And I guess, how do you think about that kind of normalizing over time?
Brice Hill
Yes, I can start, Joe. The capital intensity, since it's mostly ICAPS, what we see in ICAPS is the capital intensity is sort of like leading logic was five or eight years ago. So that whole discussion about there being a lack of reuse, especially in China, those are mostly greenfield sites. They are new equipment sets. So the capital intensity is fairly high. And we think that's consistent by the way with most of the ICAPS additions going on across the globe. And that's a major factor as to why overall intensity as we measure intense WFE intensity to semiconductors is going up over time as the fact that ICAPS is so much higher.
Michael Sullivan
Thank you, Joe.
Operator
Thank you. [Operator Instructions] Our next question comes from the line of Sidney Ho from Deutsche Bank. Your question, please.
Sidney Ho
Thank you. I wanted to ask about the AGS business. Gary, you talked about AGS still growing this year despite the many different headwinds. And if you kind of just look at the upside and the AGS in the quarter, can you speak to what drove the upside given the underutilization across foundry-logic and memory. And then also I want to ask about how do you expect the segment to perform in the second half of the year, now that all the memory suppliers have been taking down the utilization – and is there a range of AGS growth we should be thinking about this year? Thank you.
Gary Dickerson
Yes. Thanks for the question. So AGS, if you look at the way that business breaks out – about 85% is spares and service. And a significant percentage over 60% is long-term agreements, subscription types of agreements with a length of 2.6 years. We're still seeing very, very high renewal rates. So one thing that helps us in this type of market environment is a lot of that business is still based on those longer-term agreements. So that's helping giving us a level of stability in this type of a market.
And then the other part of AGS, kind of mid-teens is the 200-millimeter business, that's really focused on ICAPS. And that business is very robust. So I would say that our business, again, relative to the agreements, pretty stable, continuing to grow, strong renewal rates. And then the 200-millimeter business is also very stable and growing in 2023. I don't know, Brice, if you want to add anything else?
Brice Hill
I think that's a major thing, and we've said that we expect it to grow for the year. So it's growing year-over-year, and we expect it to grow for the year. And our outlook does include you see it slower growth in Q3. So our outlook does assume that there'll be lower utilization in some of the factories. So we've accounted for that Sydney, but we do expect it to grow year-over-year.
Gary Dickerson
Yes. And I guess the other thing I would add is that we – certainly, we're growing this year. And we still we're still on track to this model that we had talked about a couple of years ago with low double-digit growth for AGS longer term.
Michael Sullivan
Great. Thank you, Sidney.
Operator
Thank you. [Operator Instructions] And our next question comes from the line of Brian Chin from Stifel. Your question, please.
Brian Chin
Good afternoon. Thanks for letting us ask a question. Yes. I guess sort of doubling back on sort of ICAPS for the year. Obviously, it's almost like a one-for-one offset to some of the industry weakness in memory and advanced logic foundry. But I guess can you talk maybe to linearity a bit? Because you have talked about how back maybe the backlog did increase this quarter, but still at pretty robust levels. Lead times have sort of normalized. And I think the expectation was that there'd be a little bit of a gearing towards the calendar first half in terms of that business. So I'm kind of curious how you see that still for calendar second half, and whether some of this China that's been discussed is part of maybe a wildcard relative to how you view that second half?
Brice Hill
Yes. Thanks, Brian. Without getting specific about trends quarter-over-quarter, it has been gradually increasing. So – if we look back to, I think, Q3 of last year, Q3, Q4, Q1, Q2, I think we have an increased trend across each of those quarters. And so we're not going to guide the second half, but I don't think there's I don't think there was a front-loaded phenomenon in ICAPS.
Gary Dickerson
Yes. Brian, the other thing I would add is that implant, as Brice mentioned earlier, is one of our most supply-constrained businesses. We have very significant demand. We've launched around 10 new products and ICAPS over the last few years. So that business is going to continue to ramp through the year as we close that supply/demand gap. So that is a significant portion of ICAPS, an area where we have real strength with the customers, the demand there for the inflections is very strong. So again, that's another factor driving our ICAPS strength.
Brian Chin
Okay, great. Thank you.
Michael Sullivan
Thank you, Brian.
Operator
Thank you. [Operator Instructions] And our next question comes from the line of Quinn Bolton from Needham. Your question, please.
Quinn Bolton
I guess I have a clarification and a question. Just a clarification on the China export clarifications that we received. I think some of your larger cap peers have talked about benefits of $200 million to $300 million in the second half. You have higher market share I think in China, can we expect that those export clarifications probably have at least a $300 million benefit for you in the second half?
Brice Hill
Hi, Quinn, since it's a small number of customers, we're not going to be specific about the number, but we definitely see the same situation. We have factories that we will be able to ship to in the second half. And at least for Q3, that's in our guide.
Quinn Bolton
Okay. And then the question just with the ICAPS strength and relative weakness in advanced foundry-logic. I think you've talked about ICAPS being about half foundry-logic. I assume for 2023 that's probably more than half of the business, but wondering if you might be able to give us a range where you think ICAPS falls out for 2023, given the relative strength?
Brice Hill
Yes, it is larger. The growth has been significant, both last year and this year, as we talked about, and we think it's stable. And then the only thing we've really guided is long-term, we think foundry-logic is a little bit weakened this year. So we think that gets in more of a balance in the long-term on the logic side of WFE. So long-term, we would say it's relatively equal. This year, ICAPS is the largest market.
Quinn Bolton
Thank you.
Brice Hill
Thanks, Quinn.
Operator
Thank you. [Operator Instructions] And our next question comes from the line of Blayne Curtis from Barclays. Your question, please.
Blayne Curtis
Hey, thanks for letting me ask a question. Maybe just a follow-up on that last one. I was curious at the leading-edge. If you could just walk us through the extent of the pushouts and really just trying to figure out, you're still seeing quite low utilizations at the leading-edge. Some of the markets may recover in the second half. But I'm just kind of curious your visibility into when that leading-edge segment may rebound?
Brice Hill
Hi, Blayne. For the low utilization, it is relatively low. I think it's – for leading-edge factories, I saw somebody quoting around 70%. I think that's probably a good range right now for leading-edge. And the pushouts are really site-specific and project-specific I don't think they sense or signal a change in direction of any of our customers in terms of their intent to build out new process technologies. And what's ahead for us that's most important is this transition to Gate-All-Around, and we think that will start in earnest as we get into 2024, and that's one of the big inflections that we think will drive value for Applied. So anyway, that's what I would say on the pushouts.
Gary Dickerson
Yes, Blaine, I would say that a couple of things. One, the 3-nanometer, we still – everything that we see – that's going to be an important technology node. And so certainly, next year, we think that's going to be a meaningful contribution to revenue for Applied. And then as Brice said, for Gate-All-Around, we'll see the initial ramping of that spending in a meaningful way also in 2024.
Blayne Curtis
Thanks, guys.
Brice Hill
Thanks, Blayne.
Operator
Thank you. [Operator Instructions] And our next question comes from the line of Vijay Rakesh from Mizuho. Your question, please.
Vijay Rakesh
Yes. Hi, Gary and Brice. Just a quick question on the government funding. I know you mentioned $400 billion. How much do you expect that to add to global WFE if you look at 2023 or second half, 2023 or 2024?
Brice Hill
Hi. Thanks, Vijay. That's the right number, global phenomenon, as you talked about. The way we think about it is it will add about 3% to 7% of WFE over the next five years. We don't think $400 billion will be incremental WFE. What we think it does is set the locations, our customers will be putting their assets in place. And because some of those locations will be new, you won't have quite the economies of scale as they might have in their larger facility areas, and that will drive a small amount of incremental equipment since there's a little bit less economies of scale. So we estimate that to be 3% to 7% over the next five years. And then in the very short-term, we do see companies that are starting to accrue for some of the tax benefits were included in that group. So I think the incentives are already starting to encourage investment.
Vijay Rakesh
Got it. And then on the China side, would it be fair to assume that next year ICAPS continue to hold up, but might be memory spending could be down again year-on-year for China?
Brice Hill
On the ICAPS side, we do expect it to hold up. And then memory. I think memory is more market-driven. So what we're seeing for both the memory and the leading-edge logic for next year. It's going to be more dependent on macro and some of those consumer markets. So TBD on that piece.
Vijay Rakesh
Got it. Thank you.
Operator
Thank you. [Operator Instructions] And our next question comes from the line of Mehdi Hosseini from SIG. Your question, please.
Mehdi Hosseini
Thanks for giving me a chance. Two questions. For Brice, I'm just trying to better think about earnings given opportunities with ICAPS and other areas. And in that context, should I assume that like if I were to use FY2022, WFE was close to $100 billion. And you guys did almost 793quarter in earnings. In looking forward, can you hit those kind of revenue targets without having WFE well above 90 billion? And then for Gary, I understand the government incentives so that is very good for the equipment industry. But in the longer term, don't you think that these subsidies could make the cycles actually more volatile? And perhaps I could reference what happened the past few years, demand got pulled in? And then we had some correction in SEMICON? And I just want to understand how you think about the subsidies in the context of form of the cycle or shape of the cycles and volatilities?
Brice Hill
Hi, Mehdi. On the earnings question, I think if I understand that, yes, $90 billion would support larger earnings as we go forward because our AGS business will continue to grow. We expect upsides in our display business as we go forward. So if you're looking to model those, I would look at modeling the continued growth in AGS and thinking about upsides in display on top of where we are today. And that should give you a perspective on if there's no growth in WFE where the model could get to over the next couple of years? And then, Gary, on subsidies.
Gary Dickerson
Yes. I think that Brice talked about 3% to 7% Mehdi incremental spending over the next several years. Certainly, there's a tremendous amount of competition between different geographies. But customers, we think, will invest based on where they see the demand – so the timing of those investments, I don't think they're going to be significantly different than the way they thought about it in the past.
The one thing I would say that should be a benefit is that as these companies move into new regions and they're starting up new factories, the initial efficiency of those factories is going to be lower. For sure, as they're moving into the new locations, and that's also incremental help for our service business because they don't have all the trained personnel and all of the infrastructure in place in those new locations. So anyway, that's the way we think about it.
Michael Sullivan
Okay. Thank you, Mehdi. And operator, I think we have time for one more question or a follow-up, please.
Operator
Certainly then our final question for today is a follow-up question from the line of Stacy Rasgon from Bernstein Research. Your question, please.
Stacy Rasgon
Hi guys. Thanks for taking my follow-up. I had a question on the investment plans that you're going to be talking about next week. I know you gave us the details then, but I was wondering if you could give us just a little bit of a bread crumbs here on what the purpose of this is you talked about gains in the Gate-All-Around like five points. Do you need these kind of investments to get those market share gains? Or is this something that kind of gives you an edge like into the second half of the decade, with like resources and support that you can offer that others are not going to be able to offer. Just anything you could tell us in advance of maybe the details next week, that would be helpful?
Gary Dickerson
Yes. Stacy, thanks for the question. So what I would say is that one of the most important factors for any company is the time to innovation, time to commercialization and innovation success rate. So we've been – and as you know, it takes many, many years from concept to high-volume manufacturing. And that's somewhat of a serial process. And so working with some of our largest customers, we think there's opportunities to drive some of those steps in parallel and significantly accelerate time to innovation. So that's what we're going to be talking about next week. It's really exciting. Again, I definitely do think there's opportunities there. And I do believe that materials inflections, new structures, some of the things I've talked about that's going to be a bigger and bigger percentage of gains. Some of our big customers talk about design technology co-optimization, becoming a much bigger part of their roadmap for energy-efficient computing. So I think, Stacy, we'll cover more of this next week, but we have been working with our largest customers on some of these concepts. And I definitely think there's ways to accelerate innovation. And as you know, if you think about how much money companies spend on each R&D dollars on each technology node, there's a tremendous opportunity for economic optimization, both on cost and then value creation. Anyway, we'll cover more of that next week. And then we will also cover this at the SEMICON event that Mike talked about earlier.
Stacy Rasgon
So is this just like a new maiden fab? Or is it more than that?
Gary Dickerson
I'd say it's more than that. The concepts, certainly, the scale of what we're talking about is pretty significantly bigger than what we're doing today. And the concept of how we're going to work through the entire ecosystem, I think, are pretty exciting.
Stacy Rasgon
Got it. Thank you, guys.
Operator
Michael Sullivan
All right. Thanks, Stacy for your question. Brice, would you like to help us close out the call today?
Brice Hill
Thank you, Mike. My takeaway today is while there are areas of weakness in our markets this year, Applied is making good operating progress and outperforming the markets, thanks to our unique breadth and diversity. We're confident about the industry's long-term growth opportunity, and we're in a great position to make significant investments in our future and increase cash returns to shareholders. On Monday, we look forward to detailing the strategic investment we're making to collaborate closely and productively with our customers that Gary just described. Gary will see many of you at the Bernstein Conference in New York on June 1, and I hope to see you at the BofA conference in San Francisco, June 7. Mike, please go ahead and close the call.
Michael Sullivan
Okay. Thanks, Brice. And we'd like to thank everybody for joining us today. A replay of today's call is going to be available on the IR page of our website by about 5 o’clock Pacific Time, we'd like to thank you for your continued interest in Applied Materials.
Operator
Thank you, ladies and gentlemen, for your participation in today's conference. This does conclude the program. You may now disconnect. Good day.