Taiwan Semiconductor Manufacturing Company Limited (TSM) Q2 2023 Earnings Call Transcript

July 20, 2023

Taiwan Semiconductor Manufacturing Company Limited (NYSE:TSM) Q2 2023 Earnings Conference Call July 20, 2023 2:00 AM ET

Company Participants

Jeff Su - Director, IR
Wendell Huang - VP & CFO
C. C. Wei - Vice Chairman & CEO
Mark Liu - Chairman

Conference Call Participants

Gokul Hariharan - JPMorgan
Bruce Lu - Goldman Sachs
Charlie Chan - Morgan Stanley
Randy Abrams - Credit Suisse
Laura Chen - Citi
Rolf Bulk - New Street Research
Sunny Lin - UBS
Brett Simpson - Arete
Mehdi Hosseini - SIG
Charles Shi - Needham

Jeff Su

[Foreign Language] Good afternoon, everyone, and welcome to TSMC's Second Quarter 2023 Earnings Conference Call. This is Jeff Su, TSMC's Director of Investor Relations and your host for today. TSMC is hosting our earnings conference call via live audio webcast through the company's website at www.tsmc.com, where you can also download the earnings release materials. If you are joining us through the conference call, your dial-in lines are in listen-only mode.

The format for today's event will be as follows: first, TSMC's Vice President and CFO, Mr. Wendell Huang, will summarize our operations in the second quarter 2023, followed by our guidance for the third quarter 2023. Afterwards, Mr. Huang, TSMC's CEO, Dr. C. C. Wei; and TSMC's Chairman, Dr. Mark Liu, will jointly provide the company's key messages. Then we will open the line for a question-and-answer session.

As usual, I would like to remind everybody that today's discussions may contain forward-looking statements that are subject to significant risks and uncertainties, which could cause actual results to differ materially from those contained in the forward-looking statements. Please refer to the safe harbor notice that appears in our press release.

And now I would like to turn the call over to TSMC's CFO, Mr. Wendell Huang, for the summary of operations and the current quarter guidance.

Wendell Huang

Thank you, Jeff. Good afternoon, everyone, and thank you for joining us today. My presentation will start with financial highlights for the second quarter of 2023. After that, I will provide the guidance for the third quarter.

Second quarter revenue

Gross margin decreased 2.2 percentage points sequentially to 54.1%, mainly reflecting lower capacity utilization and higher electricity cost, partially offset by more stringent cost control and a more favorable foreign exchange rate.

Despite the industry's cyclical downturn, we continue to invest in R&D to support our N3 and N2 development. Thus, operating margin was 42%, down 3.5 percentage points sequentially. Overall, our first quarter EPS was NT7.01 and ROE was 23.2%.

Now let's move on to revenue by technology. 5-nanometer process technology contributed 30% of our wafer revenue, excuse m e, in the second quarter, while 7-nanometer accounted for 23%. Advanced technologies, defined as 7-nanometer and below, accounted for 53% of wafer revenue.

Moving on to revenue contribution by platform. HPC decreased 5% quarter-over-quarter to account for 44% of our second quarter revenue. Smartphone decreased 9% to account for 33%. IoT decreased 11% to account for 8%. Automotive increased 3% to account for 8%, and DCE increased 25% to account for 3%.

Moving on to the balance sheet. We ended the second quarter with cash and marketable securities of NT1.5 trillion or $48 billion. On the liability side, current liabilities decreased by NT62 billion, mainly due to the net decrease of NT87 billion in income tax payable as we pay NT120 billion for 2022 income tax, offset by NT33 billion accrued tax payables for the second quarter.

Long-term interest-bearing debt increased by NT53 billion mainly as we raised NT41 billion in corporate bonds. On financial ratios, accounts receivable turnover days decreased 2 days to 32 days, while days of inventory increased 3 days to 99 days, primarily due to entry ramp during the quarter.

Regarding cash flow and CapEx. During the second quarter, we generated about NT167 billion in cash from operations, spent NT251 billion in CapEx, distributed NT71 billion for third quarter 2022 cash dividend, and raised NT41 billion from corporate bond issuances. Overall, our cash balance decreased by NT109 billion to NT1.3 trillion at the end of the quarter.

Free cash flow was negative NT83 billion during the quarter as operating cash flow was more than offset by capital expenditures, partly due to the income tax payment of NT120 billion. In U.S. dollar terms, our second quarter capital expenditures totaled NT8.17 billion.

I have finished my financial summary. Now let's turn to our current quarter guidance. Based on the current business outlook, we expect our third quarter revenue to be between NT16.7 billion and $17.5 billion, which represents a 9.1% sequential increase at the midpoint.

Based on the exchange rate assumption of $1 to NT30.8, gross margin is expected to be between 51.5% and 53.5%, operating margin to be between 38% and 40%. This concludes my financial presentation.

Now let me turn to our key messages. I will start by making some comments on our second quarter '23 and third quarter '23 profitability. Compared to first quarter, our second quarter gross margin decreased by 220 basis points sequentially to 54.1%, primarily due to a lower capacity utilization.

Compared to our second quarter guidance, our actual gross margin slightly exceeded the high end of the range provided 3 months ago, mainly due to more stringent cost control efforts and a slightly more favorable foreign exchange rate.

We have just guided our third quarter gross margin to decline by 1.6 percentage points to 52.5% at the midpoint, primarily as the higher level of capacity utilization rate is offset by 2 to 3 percentage points margin dilution from the initial ramp-up of our 3-nanometer technology.

Looking ahead to the fourth quarter, we expect the continued steep ramp-up of our 3-nanometer to dilute our fourth quarter gross margin by about 3 to 4 percentage points.

In 2023, our gross margin faces challenges from lower capacity utilization due to semiconductor cyclicality, the ramp-up of N3, overseas fab expansion and inflationary costs, including higher utility costs in Taiwan. To manage our profitability in 2023, we will work diligently on internal cost improvement efforts while continuing to sell our value. While we face near-term challenges, we continue to forecast a long-term gross margin of 53% and higher is achievable.

Next, let me talk about our 2023 capital budget and depreciation. Every year, our CapEx is spent in anticipation of the growth that will follow in future years. Given the near-term uncertainties, we continue to manage our business prudently and tighten up our capital spending where appropriate. We now expect our 2023 capital budget to be towards the lower end of our range of between $32 billion and $36 billion.

Our depreciation expense is now expected to increase by mid-20s percent year-over-year in 2023, mainly as we ramp our 3-nanometer technologies. Despite near-term inventory cycle, our commitment to support customers' structural growth remains unchanged, and our disciplined CapEx and capacity planning remains based on the long-term market demand profile.

We will continue to work closely with our customers to plan our long-term capacity and invest in leading-edge specialty and advanced packaging technologies to support their growth while delivering profitable growth to our shareholders.

Now let me make a few comments on our cash dividend distribution policy. The objectives of TSMC's capital management are to fund the capital - the company's growth organically, generate good profitability, preserve financial flexibility and distribute a sustainable and steadily increasing cash dividend to shareholders.

As a result of our rigorous capital management, in May, TSMC Board of Directors approved the distribution of NT3 per share cash dividend for the first quarter of 2023, and up from NT2.75 previously. This will become the new minimum quarterly dividend level going forward.

First quarter '23 cash dividend will be distributed in October 2023. For 2023, TSMC shareholders will receive a total of NT11.25 per share dividend and at least NT12 per share cash dividend for 2024. Going forward, as our capital intensity begins to decline in the next several years, the focus of our cash dividend policy is expected to shift from a sustainable to a steadily increasing cash dividend per share in the next few years.

Now let me turn the microphone over to C. C.

C. C. Wei

Thank you, Wendell. Good afternoon, everyone. First, let me start with our near-term demand and inventory. We concluded our second quarter with revenue of $15.7 billion in line with our guidance in U.S. dollar terms. Our business in the second quarter was impacted by the overall global economic conditions, which dampened the end market demand and customers' ongoing inventory adjustment.

Moving into third quarter 2023. While we have recently observed an increase in AI-related demand, it is not enough to offset the overall cyclicality of our business. We expect our business in the third quarter to be supported by the strong ramp of our 3-nanometer technologies, partially offset by customers continued inventory adjustment.

In the last quarterly conference, we said we expect fabless semiconductor inventory to rebalance to a healthier level exiting the third quarter. This statement continue to hold true. However, due to persistent weaker overall mega economic conditions slower-than-expected demand recovery in China and overall softer end market demand conditions, customers are more cautious and intend to further control their inventory into 4Q '23.

Thus while we maintain our forecast for the 2023 semiconductor market, excluding memory, to decline mid-single digit year-over-year, we now expect the foundry industry to decline mid-teens and our full year 2023 revenue to decline around 10% in U.S. dollar term. With such inventory control, we also forecast the fabless semiconductor inventory to exit 4Q '23 at a healthier and lower level as compared to our expectation 3 months ago.

Next, let me talk about the HPC and TSMC's long-term growth outlook. As we have said before, the massive structural increase in demand for computation underpinned by the industry megatrend of 5G and HPC continues to drive greater need for performance and energy-efficient computing, which require use of leading-edge technologies. These megatrends are expected to fill TSMC's long-term growth. Even with a more challenging 2023, our revenue remains well on track to grow between 15 and 20 CAGR over the next several years in U.S. dollar terms, which is a target we communicated back in January 2022 Investor Conference.

The recent increase in AI-related demand is directionally positive for TSMC. Generative AI requires higher computing power and interconnect bandwidth, which drive increasing semiconductor content. With using CPUs, GPUs or AI accelerator and related ASIC for AI and machine learning, the commonality is that it requires use of leading-edge technology and a strong foundry design ecosystem. These are all TSMC's strengths.

Today, server AI processor demand, which we define as CPUs, GPUs and AI accelerators that are performing training and influence [ph] functions accounts for approximately 6% of TSMC's total revenue. We forecasted this to grow at close to 50% CAGR in the next 5 years and increase to low teens percent of our revenue.

The sensible [ph] need for energy-efficient computation is starting from data centers, and we expect [indiscernible] proliferate to edge and devices of time, which will further long term, which will drive further long-term opportunities. We have already embedded a certain assumption for AI demand into our long-term CapEx and growth forecast.

Our HPC platform is expected to be the main engine and the largest incremental contributor to TSMC's long-term growth in the next several years. While the quantification of the total addressable opportunity is still ongoing, generative AI and large language model only reinforce the already strong conviction we have in the structural mega trend to drive TSMC's long-term growth, and we will closely monitor the development for further potential upside.

Now let me talk about our N3 and N3E status. Our 3-nanometer technology is the most advanced semiconductor technology in both PPA and transistor technology. N3 is already involved in production with good yield. We are seeing robust demand for N3 and we expect a strong ramp of N3 in the second half of this year, supported by both HPC and smartphone applications.

N3 is expected to continue to contribute mid-single-digit percentage of our total wafer revenue in 2023. N3E further extend our N3 family with enhanced performance, power and yield and provide complete platform support for both HPC and smartphone applications. N3E has passed the qualification and achieved performance and yield target and will start volume production in the fourth quarter of this year.

With our continuous enhancement of 3-nanometer process technologies, we expect strong multi-yield demand from our customers and are confident that our 3-nanometer family will be another large and long-lasting node for TSMC.

Finally, I'll talk about our N2 status. Our N2 technology development is progressing well and on track for volume production in 2025. Our N2 top [ph] nanosheet transistor structure to provide our customer with the best performance, cost and technology maturity. Our nanosheet technology has demonstrated excellent power efficiency and our N2 watt delivered full node performance and power benefits to address the increasing need for energy-efficient computing.

As part of N2-technology platform, we also developed N2 with backside power rail solution, which is best suited for HPC applications. Backside power rail will provide 10% to 12% additional speed gain and 10% to 15% large density boost on top of the baseline technology. We are targeting backside power rail to be available in the second half of 2025 to customers with production in 2026.

We are observing a high level of customer interest and engagement at N2 from both HPC and smartphone applications. Our 2-nanometer technology will be the most advanced semiconductor technology in the industry in both density and energy efficiency when it is introduced and to further extend our technology leadership right into the future.

This concludes my prepared remarks, and now let me turn the microphone over to Mark.

Mark Liu

Thank you, C. C. And good afternoon, everyone. Today, I want to talk about TSMC's global manufacturing footprint, status update. TSMC's mission is to be the trusted technology and capacity provider of the global logic IC industry for years to come. Our strategy is to expand our global manufacturing footprint to increase customer trust and to expand our future growth potential and to reach for more global talents.

Our overseas decisions are based on our customers' needs and the necessary level of government support. That is to maximize the value of our shareholders and to fulfill our fiduciary duty. In Arizona, we are building our first fab to provide U.S. most advanced semiconductor technology in mass production to support the needs for U.S. semiconductor infrastructure. Our fab in Arizona started construction in April, 2021 with an aggressive schedule. We are now entering a critical phase of handling and installing the most advanced and dedicated equipment.

However, we are encountering certain challenges, as there is an insufficient amount of skill workers with those specialized expertise required for equipment installation in a semiconductor grade facility. While we are working on to improve the situation, including sending experienced technicians from Taiwan to train the local skill workers for a short period of time. We expect the production schedule of N4 process technology to be pushed out to 2025.

In Japan, we are building a specialty technology factory, which will utilize 12, 16 and 22, 28 process technologies. Volume production is on track for late 2024. In Europe, we are engaging with customers and partners to evaluate building a specialty fab in Germany, focusing on automotive specific technologies based on the demand from our customers and the level of government support.

In China, we are expanding 28-nanometer in Nanjing as we planned to support our customer in China, and we continue to follow all rules and regulations fully. At the same time, we continue to invest in Taiwan and to expand our capacity to support our customers' growth.

From a cost perspective, the initial cost of overseas fab are higher than TSMC's fabs in Taiwan due to: one, the smaller fab scale; two, higher costs throughout the supply chain; and three, the early stage of semiconductor ecosystem on those overseas sites, as compared to a matured ecosystem in Taiwan.

In our recent meetings with senior government officials in the U.S., Japan and Europe, we discussed our plans to expand our global manufacturing footprint to them. We also emphasize one of our major responsibility is to manage and minimize the cost gap to maximize return for our shareholders. Those discussions went very well. All sites understand the critical and integral role TSMC plays in the semiconductor industry, and we appreciate all the government's ongoing support in working with TSMC to help narrow down the cost gap. We will continue to work closely with all the governments to secure the further support.

Our pricing will also remain strategic to reflect our value, which includes the value of geographic flexibility. At the same time, we will leverage our fundamental competitive advantage of manufacturing technology leadership, large volume and economies of scale to continuously drive our cost down.

By taking such actions, TSMC will have the ability to absorb the higher cost of overseas fab, while remaining the most efficient and cost-effective manufacturer no matter where we operate. Thus, even as we expand our capacity overseas, TSMC's long-term gross margin of 53% and higher and sustainable ROE of greater than 25% is achievable, and we will continue to maximize the value for our shareholders.

This concludes our key messages. Thank you for your attention.

Jeff Su

Thank you, Chairman. This concludes our prepared statements. Before we start the Q&A session, I would like to remind everybody to please limit your questions to two at a time to allow all the participants an opportunity to ask their questions. Should you wish to raise your question in Chinese, I will translate it to English before our management answers your question. [Operator Instructions]

Now let's begin the Q&A session. Operator, can we please proceed with the first caller on the line?

Question-and-Answer Session

Operator

The first one – question, Gokul Hariharan from JPMorgan. Go ahead please.

Gokul Hariharan

Yes. Thank you. Good afternoon. And thanks for a lot of clarity on the AI-related exposure. My first question is on the AI front. A lot of TSMC's customers have been talking about capacity shortage and having to kind of queue up for capacity for AI accelerators, including GPUs and ASICs. Could TSMC talk a little bit about what TSMC is doing on the capacity side, especially on the advanced packaging, but also on other areas?

And when do you expect to get back to some degree of demand and supply balance for these AI accelerators? Is it going to be only sometime next year? Or you think it could happen quicker based on what you see on demand from your customers and the capacity plan?

Jeff Su

Okay. Gokul, thank you. Let me try to - please allow me to summarize your first question. So first question from Gokul is that he notes that we are - customers are seeing strong demand from AI-related, but they're facing capacity tightness or shortage. So his question is, what are we doing in terms of the capacity side, maybe both in terms of the advanced packaging, as well as the logic? And then when do we see the demand-supply imbalance returning to a better, healthier balance level? Is it sometime next year? Is that correct, roughly, Gokul?

Gokul Hariharan

Yes. Right.

C. C. Wei

Okay. Gokul, this is C. C. Wei. Let me answer your question. For the AI, right now, we see a very strong demand, yes. For the Tongan [ph] part, we don't have any problem to support. But for the back end, the advanced packaging side, especially for the cohorts, we do have some very tight capacity to - very hard to fulfill 100% of what customer needed. So we are working with customers for the short term to help them to fulfill the demand, but we are increasing our capacity as quickly as possible. And we expect these tightening will be released in next year, probably towards the end of next year. But in between, we're still working closely with our customers to support their growth.

Gokul Hariharan

Okay. And C. C., maybe one follow up. Could you let us show what kind of capacity expansion, like how much capacity you're expanding on the cohort side? Like any kind of quantity, what kind of capacity you are adding?

Jeff Su

Okay. So Gokul, just an additional to the first question, how much capacity are we going to increase in terms of cohorts [ph]

C. C. Wei

Let me give you - I will not give you the exact number, but let me give you a roughly probably 2x of the capacity will be added. Okay, Gokul.

Jeff Su

Gokul? Okay, Gokul, are you there? If not, operator, maybe we move on to the next participant. Gokul, are you there? Okay. I think there was - disconnected. All right. Let's move on to the next caller, person, please.

Operator

Next one to ask question, Bruce Lu from Goldman Sachs. Go ahead please.

Bruce Lu

Okay. Thank you for taking my question. I still want to know about like, the TSMC maintained the 15% to 20% up in CAGR, when we cut this year's revenue to minus 10%, right. That's all – will you use that 15% revenue CAGR to 2026, that seem slight above like 25-plus percent present data [ph] from the coming 2 years, which means that the overall semi growth is not increased like a lot for the next 2 years. And you just mentioned that the AI only accounts for 6% with low teens potentially. That is not big enough to get back to the trend. So what is the underlying growth you have with the global training in the coming years? And what are the key assumptions for the growth for each segment?

Jeff Su

Okay. Bruce, let me try to summarize your first question. So Bruce's first question is on our long-term growth CAGR, which we have said is to be between 15% to 20% from '21 to '26 CAGR period. So Bruce's question, this year, C.C., just said we will decline around 10%. Under his calculation, I think he's saying, well, this implies you should grow 25% the next several years, which, of course, this is a CAGR, but nonetheless. And so Bruce's question is that, therefore, if that's the type of growth, then shouldn't that imply a much higher growth level for the overall semiconductor excluding memory industry. I think that is your question, Bruce. Am I correct?

Bruce Lu

Yes. What are the key assumptions for this quarter?

C. C. Wei

Okay. Let me handle this question. The - your rationale is correct. However, some of the factors may not be totally included. For one thing, in your model that the customer's gross margin, 60% plus, I don't think that will represent the average customer's gross margin and maybe some specific ones.

However, the other one is the market share. The market share factor, you assumed the constant, that is not - one thing that could be different than in your formula. So the semiconductor growth, right now, we are forecasting 4% to 5%. It may increase, but definitely, as you said, it won't increase to 10%. But those longer-term semiconductor, excluding memory growth is still yet to be evaluated. Did I answer your question?

Bruce Lu

Yes. But the reason - the reason I do that is I'm assuming that you have like 1 million [ph] market share in the advanced node and also the growth is mostly coming from an advanced node, which customers growth lines is supposed to be higher. So I think that the gap is wide enough. That's what I'm wondering right, whether I miss anything, which might be big enough to move the needle that might - investments that the management might - can give us some color?

C. C. Wei

I don't - this is a factor. As far as the market share value, you might not totally included all the factors. That's my perspective. But I cannot dig into the numerical comparison at this point here. What I mean, the market share is not just the advanced leading-edge technologies, but also the share of the outsourcing.

Jeff Su

So maybe, Bruce, if I summarize again, TSMC's growth is driven by both the underlying structural megatrends but also by our technology leadership and differentiation. So our CAGR is a combination of those two factors.

Bruce Lu

Okay. Thank you.

Jeff Su

Do you have any...

Bruce Lu

Yes. My next question is regarding to the guidance changes. The previous guidance for the full year was long to mid-single digit, now is about like 10% decline. So the gap is like 5% of the total revenue, which is like quite sizable in terms of revenue. With that $3 billion, $4 billion highly concentrated in the second half of fourth quarter. Can you give us like what are the changes in terms of this shortfall? Where are the weakness come from?

Jeff Su

Okay. So Bruce's, second question is looking at our 2023 full year guidance. He noticed last time, we had said low to mid-single-digit decline. This time, we have guided to around 10%. So his question is the delta of this seems to be all - a lot of it also in the fourth quarter. So what - is there any particular segment or market that is driving this? And what are the factors behind this? Is that correct, Bruce?

Bruce Lu

Yes. Thank you.

C. C. Wei

Okay. Bruce, let me answer the question. Yes, we did see something different. The first, the maker is weaker than what we thought. Three months ago, we probably - probably more optimistic, but now it's not. Also that is - for example, China economy’s recovery is actually also weaker than what we thought. And so the end market demand actually did not grow as we expected.

So put all together, even we have a very good AIs processor demand is still not enough to offset all those kinds of macro impact. So now we expect that the whole year will become minus 10%. That's what we thought.

Jeff Su

And in terms of by particular segment or is there a particular market?

C. C. Wei

It's almost - well, thank you. You are asking me the question. It's almost intact...

Bruce Lu

I understand my question. Thank you.

C. C. Wei

Yes. It's overall market segment is being impacted because of - it's a combination of the macroeconomics.

Bruce Lu

So can we conclude that other than AI, almost every application see some weakness in the second half?

C. C. Wei

You got it.

Bruce Lu

Thank you.

Jeff Su

Okay. Thank you, Bruce. Operator, can we move on to the next participant, please?

Operator

Next one to ask question is Gokul Hariharan from JP Morgan.

Jeff Su

Gokul, you are back. Okay.

Gokul Hariharan

Yes, sorry about that. So next question, just wanted to ask about TSMC management's view on the current inventory cycle. It looks like this cycle is a much - taking it much longer to get through the down cycle compared to '19 and 2015. When do you think we kind of bottom out? And do you feel that the recovery in next year is going to be a strong recovery? Or you think it's going to be a more gradual recovery? What are the kind of plans that we are putting in place as we think about next year's recovery once inventory situation last cycle [ph] Thank you.

Jeff Su

Okay. So Gokul's second question is about the inventory correction cycle. He notes this cycle seems to be taking much longer to get through as compared to 2019 and/or 2015. So his second question is when do we think this cycle can bottom out? What will 2024 next year look like? Do we expect a strong recovery? And what factors are we looking at? Is that correct, Gokul?

Gokul Hariharan

Yes. Thanks. Thanks a lot.

C. C. Wei

Okay. Gokul, this is a good question. Let me answer it in a short one sentences, all about the bank core [ph] I mean I just say the macroeconomic is not so - it's become weaker than we thought. In fact, higher inflation and interest rate impact end demand in all market segments, in every region in the world.

As we said, under such situation, our customers are more cautious in their inventory control in the second half of this year. So while we expect the fabless semiconductor industry, their inventory to be cleaner and healthier existing this year, but we're much closer to the seasonal level, but our expectation for them, they will continue to manage their inventory. And 2024, it is still dependent on the macro situation. Gokul?

Gokul Hariharan

Okay. So, excuse me, so that - it sounds like you're still expecting at least early part of next year to still be a little bit challenging, similar to what it is looking like right now. Is that fair to say?

C. C. Wei

Look, if you are...

Gokul Hariharan

About next year...

C. C. Wei

Gokul, we will give you our comment next time for 2024.

Gokul Hariharan

Thank you.

Jeff Su

Thank you, Gokul. Operator, can we move on to the next participant, please?

Operator

Next one, we have Charlie Chan from Morgan Stanley.

Charlie Chan

Hey, gentlemen. Good afternoon. Thanks for taking my questions. So my first question is about the overseas fab cost seems to get higher. So would the TSMC consider to further adjust your pricing to absorb those increased costs? And also management mentioned that you're doubling or more than doubling your advanced packaging, given the AI Russia [ph] order. Would that give you a chance to reprice the back end foundry service? Because I remember there was a kind of below company's gross margin average. Would that be a chance to bring that back to the corporate average? Thank you.

Jeff Su

Okay. Charlie. Charlie's first question is, I guess, regarding pricing, two parts or two angles. First on the overseas fab, given that the costs are higher, would TSMC consider to further adjust our wafer price. And also along similar lines related to advanced packaging, given we are – C.C. said doubling roughly the capacity would we consider to also charge more or higher given that the returns of the back end are lower?

Wendell Huang

Right. Let me answer the first question first. Yes, the overseas fab will cost higher, at least for the near future, where their supply ecosystem is not mature yet. And the labor cost is from our experience, actually it's a little bit higher than we expected.

But to answer your question, yes, as we try to get the maximum government subsidy, and we also really look at the - how the price value for the overseas geographical flexibilities, these are all considered. The aim is to, one, to increase our customer trust, make them continue to work with us going forward under the geopolitical concerns. Secondly is to maximize shareholders' value. To answer your question on price is strategically yes.

C. C. Wei

All right...

Wendell Huang

C.C, can you answer second question?

C. C. Wei

Okay. I think the second question is about the pricing or the - on the cohorts. As I answer the question, we are increasing the capacity as soon as possible manner, of course, not including actual cost. So in fact, we are working with our customers. And the most important thing for them right now is supply assurance, is supply to meet their demand. So we are working with them. We do everything possible to increase the capacity. And of course, at the same time, we share our value.

Wendell Huang

And then...

Charlie Chan

Thanks. So may I - may ask a second question, its a different topic. Is that, okay?

Wendell Huang

Sure.

Jeff Su

You get two questions. So, sure.

Charlie Chan

Thank you. Thanks, Jeff. So another question is about the AI SME demand, right, since you're providing your revenue contribution, growth assumption that is super helpful. But I'm wondering how TSMC can judge the AI demand? Because right now, it's [indiscernible] right now, customers are very aggressive booking capacity. So I'm wondering how company can judge whether those AI SME demand is for real?

And also in terms of breakdown, I'm wondering whether companies said ASIC, the customer ship is outgrowing GPU. I think the more important one should be the first part of the question, especially investors are concerned whether AI is cannibalizing the CPU server demand. So - so those are kind of the questions are in our mind. Thank you.

Jeff Su

Okay. Let me summarize your second question, Charlie. Charges on AI demand. He wants to know how do we judge the demand properly because customers are very aggressive, but how in his words, how do we know that this demand is real. And then also, how do we see the demand specifically for ASIC as it relates to AI?

Wendell Huang

Okay. You want to answer?

C. C. Wei

Let me try first and you probably...

Wendell Huang

Sure...

C. C. Wei

This is a very deep question. Of course, we have a model, basically. The short-term fancy about the AI demand definitely cannot extrapolate for the long term. Neither can we predict the near future, meaning next year, how the sudden demand will continue or will flatten out. However, our model is based on the data center structure. We assume a certain percentage of the data center processor are AI processors. And based on that, we calculate the AIs processor demand.

And this model is yet to be fitted to the practical data later on. But in general, I think the - our trend of a big portion of data center processor will be AI processor is a sure thing. And we can cannibalize the data center processors. In the short term, when the CapEx of the cloud service provider are fixed, yes, it will. It is. But as for the long term, when their data service, when the cloud services having the generative AI service revenue, I think they will increase the CapEx, that should be consistent with the long-term AI processor demand. And I mean, the CapEx will increase because of a generative AI services. Anything more for you?

Wendell Huang

Yes, Charlie, I think part of Charlie's question is also how do we see ASIC related in AI development?

C. C. Wei

Well, actually, the customer also have a high demand on the ASIC part for the AI application. And as Mark pointed out, a short-term sudden increase, you can extrapolate to be long term. But again, let me emphasize that. Those kind of application in the AI, be it CPUs, GPUs or AI accelerator or ASIC, they all need leading-edge technologies. And they all have one symptom. They are using the very large die size, which is TSMCs strength.

Charlie Chan

Got it. Thank you. Thank you very much.

Jeff Su

Okay. Thank you, Charlie. Thank you. Operator, we'll move on to the next participant, please.

Operator

Next one to ask questions. Randy Abrams, Credit Suisse.

Randy Abrams

Okay, yes. Thank you. I wanted to shift to the profitability, maybe more for Wendell. For - looking at the fourth quarter, you mentioned the 3 to 4 point dilution from N3. I think that is 2 to 3 points in the third quarter. Is that what you're suggesting, the directional change could be a little bit down margin profile? Or do you have positive offsets that could keep it more stable?

And then a follow-up on the margin, where you discussed is a tough year for margins on these factors, like the energy ramp up 3. But could you discuss 2024, do you think we're going into a period of a bit more challenging profitability or you see factors that we could comfortably get back to the 53 and above next year?

Jeff Su

Okay. Thank you, Randy. So Randy's first question is on gross margin. Fourth quarter with the N3 dilution of 3% to 4%, does that mean directionally, fourth quarter margin is sequentially down? Are there any positive offsets?

And then for looking to 2024 for the full year, if Wendell can give some comments about 2024 gross margin, will it also be challenging? Or do we still feel confident in a 53% and higher gross margin?

Wendell Huang

Okay, Randy. Starting from the second half of this year, as we said, we faced certain cost challenges, including the ramp up N3 which will dilute about 2 to 3 percentage points in third quarter and 3 to 4 in the fourth quarter, plus the higher electricity cost. But we're not giving our guidance on the fourth quarter at this moment. We're just spelling out some of the challenges that we're seeing. And of course, we are going to continue to drive down our costs and sell our value to ensure that we will have a good return on the node. That's for this year.

For next year, we're seeing - we're not talking about the whole gross margin, but we still see that N3 will dilute about 3 to 4 percentage points of next year's gross margin. And although the yield will be better next year, at the same time, the percentage of revenue contributed by N3 will be bigger. So net-net, worth, we also see some dilution from the N3 next year. But the margin - the guidance will be given out next year.

Randy Abrams

Okay. A quick follow-up to the first question. I think the last few nodes was 2 to 3 points dilution in the first year or 2 of ramp. The factor for it larger, is it the higher capital intensity or something different versus 3 - versus 5 and 7 or it looks like a little bit more dilution?

Wendell Huang

Yes. The increasing process complexity does add on to the challenges of a newer node. However, the other important factor is that our corporate averages has become higher than before. We used to have 50% gross margin. We're now talking about 53% and higher gross margin, okay?

Randy Abrams

Yes. Okay. And the second question, I wanted to ask how you're thinking about CapEx, just netting a few things, the geographic expansion, the 3 and then the start of 2-nanometer, the first ramp up or tool move in versus the mixed outlook you're looking at for macro for a ballpark CapEx into next year?

And if I could maybe within it, ask if the Arizona fab delays, does that push out where you mentioned the low end of guidance, push out some of this year to get some lift to next year?

Jeff Su

Okay. So Randy's second question is on CapEx. He wants to know basically focusing on 2024 CapEx to some of the delays in the Arizona fab push out CapEx from this year to next year, as we expand overseas, as we invest in N2, but at the same time as the macro remains uncertain, how does this impact 2024 CapEx?

Wendell Huang

Yes. Randy, the push out of fabs does push out some part of the CapEx, but that doesn't affect a big part. For 2024, it's too early to talk about the overall CapEx. However, our CapEx, if you - as we said before, every year, we spend the CapEx to capture the future growth opportunities. And in the past few years, our CapEx has risen very fast to capture the megatrend.

And going forward, the next few years, when we started to harvest those investment, we believe that CapEx will begin to level off in terms of dollar amount and that will lead to - start to lower the capital intensity in the next several years.

Jeff Su

Sorry, Randy. Sorry, do...

Randy Abrams

Yes, my quick follow-up. I think you mentioned that as you could use your 5-nanometer to support the ramp up 3. Given the AI and some of that pickup, do you still see that potential that could help optimize CapEx? Or do you need to keep it for existing node? And that's my final one. Thank you.

Jeff Su

Yes. So Randy is just also asking then how does tool commonality play a role in our future CapEx?

Wendell Huang

Yes. We always build two commonality between nodes to provide greater flexibility. We mentioned last time the strong multiyear demand from N3, we are able to support that using some of the tools from N5. We're not going to comment on the CapEx beyond this year. However, as I just mentioned, every year, the CapEx spend to capture the future growth opportunities.

Randy Abrams

Thank you, Wendell.

Wendell Huang

Okay.

Jeff Su

Thank you, Randy. Operator, can we move on to the next participant.

Operator

Next one to ask questions, Laura Chen from Citi.

Laura Chen

Thank you very much for taking my question. Good afternoon, gentlemen. Very appreciate C.C. and Mark sharing on TSMC's view on the longer-term outlook in AI. So I'm just wondering how does TSMC evaluate your second capacity expansion to think with foundry and wafer side. Since there is no problem in the foundry space, were you kind of concerned about potential overcapacity in the back-end side beyond next year? Or actually, we may see more upside at the foundry wafer side. So our - say, like advanced node utilization rate may go higher into next year? Thank you. That's my first question.

Jeff Su

Okay. So Laura's first question is looking at our expansion of advanced packaging or back end versus the front end wafer as we are expanding the back end, but not the front end, does that imply that first, that our front-end wafer particularly leading node, we expect the utilization to increase next year? And then conversely, or is there a risk that we are over expanding or overcapacity risk for the packaging side?

C. C. Wei

Okay, Laura. Let me answer the question. AI today is a very hot topic. A lot of my customers right now increase their demand, and that will increase their front end demand, of course. TSMC almost have the major share or the largest share, let me say that in the front end wafer. According to the front ends adopting [ph] we really work closely with our customer and to decide what is the back end that they need.

And so on that perspective, we are planning our cohorts capacity, although probably still not enough, but we're working very hard to increase it. Overcapacity, not today is a concern, that it is concerns, its not enough capacity to support all the very strong demand.

Jeff Su

Okay. Thank you, C.C.

Laura Chen

Yes. Thank you. That's very clear. Thank you very much C.C. And my second question is also about the gross margin outlook. If I am wrong, please correct me. I recall that the previous cycle, like 7 or 5-nanometer, the capacity usually will be three times in the third year of the new technology ramping. So I'm still - I'm wondering is still the case for N3. And particularly, we have seen that significant capacity intensity increase may lead some margin pressure, particularly in the first few years. So I'm just wondering how does TSMC balance your technology leadership and also the margin situation? Thank you.

Jeff Su

Laura, you said three times - sorry, are you referring to the revenue contribution? Sorry, you said N7...

Laura Chen

The capacity, yes.

Jeff Su

Okay. So all right, let me try to summarize your question. I think Laura is asking N7, N5, we substantially expanded the capacity. And so what is the case for N3 and then also in terms of the profitability of N3 or gross margin, to be more specific as it compares to N5 and N7 previously. Is that roughly correct, Laura?

Laura Chen

Yes. Thank you, Jeff.

C. C. Wei

Okay, Laura. Let me answer this question. As I just mentioned, the N3, due to the increasing process complexity is becoming more challenging than the previous nodes. But at the same time, we will continue to sell our value and drive down the cost at the same time. But the - we still believe that N3 will be a long-lasting and -- long lasting or a large node for TSMC. With all the efforts and we still believe that the whole company's gross margin will be 53% and higher.

Jeff Su

Okay. Laura, does that answer your question...

Laura Chen

Thank you. Really, appreciate.

Jeff Su

Yes. Okay. Thank you, Laura. Operator, let's move on to the next participant, please.

Operator

Yes. Right now, we have Rolf Bulk from New Street Research. Go ahead please.

Rolf Bulk

Thank you for taking my question. This quarter, you’ve seen the legacy node 16 and 28-nanometer in particular, were down around 15% to 20% Q-on-Q. And my question is, were there any particular end markets that caused this decline? And how do you think about the recovery of those legacy nodes? Should we still expect recovery in the fourth quarter of this year? Or is that more 2024 event? Thank you.

Jeff Su

Okay. So Rolf's first question is looking on the mature nodes, such as 16 and28 nodes, sorry, that those all saw sequential declines in the second quarter. So his question is, what is driving this - what end markets are driving this decline? And what is the expectation for this in the second half?

C. C. Wei

Well, let me answer that question. The mature nodes wafer actually or the product actually try to be convenient for the smartphone or for the PC market or for the HPC. So while the total unit of smartphone become weaker and PC become weaker. So it's a high - the leading-edge technology node being also demand dropping and so the mature node. That's together. Did I answer your question?

Rolf Bulk

Yes. Thank you. That's very clear. My second question, maybe you focus on cohorts and advanced packaging in general and also the weakness that you see in the remainder of your business. Could you maybe comment on the percentage of your CapEx spending that will go towards leading nodes, specialty nodes and packaging this year compared to last year?

Jeff Su

Okay. So Rolf’s second question is for 2023 CapEx, which our CFO has said towards the lower end of the 32% to 36% range, can we give a breakdown between leading-edge specialty technologies and then the packaging, testing, mass-making and others.

Wendell Huang

Leading-edge technology accounts for between 70% to 80% of our total CapEx in the year, mature specialty technology between 10% to 20%, and the remaining are split between advanced packaging and EBO and some others, okay?

Jeff Su

Thank you, Rolf.

Rolf Bulk

Perfect. Thank you.

Jeff Su

All right. Operator, let's move on to the next participant, please.

Operator

Next one, we have Sunny Lin from UBS.

Sunny Lin

Thank you very much. Good afternoon. Thank you for taking my questions. So my number one question is on 3-nanometer ramp-up. As we are going through third quarters on mass production, I think you must have a pretty good visibility for customer engagement for the coming few years. So I wonder now how should we think about the overall ramp of 3-nanometer if we compare with 5 and 7-nanometer? If we look at 5, you reach towards 18% of revenue in the second year of mass production and then about 24% of revenue in the third year.

Whereas for 3-nanometer, I think the concerns by smartphone customers have been on cost. Then the question will be if HPC is significant enough to still drive a meaningful pickup of 3-nanometer. And so it will be greatly appreciate if you could provide us any kind of thoughts. Thank you very much.

Jeff Su

Okay. So Sunny's first question is on the ramp of 3-nanometer. Her question really, I believe, is coming from a percentage of revenue contribution. She wants to know how is the ramp-up 3-nanometer? And then can it contribute to the revenue like N5, N7 in the past?

C. C. Wei

Yes. As I just said, we believe N3 will be a long-lasting and large node for TSMC. Now in terms of percentage, I think it's sometimes less important because our overall corporate revenue is much, much bigger these days than before. So I think you should also take that into consideration. But dollar amount-wise, it's a much bigger node.

Wendell Huang

And C.C. also said it's a multiyear strong structural demand. Yes. I am sorry, okay.

Sunny Lin

Got it. Well, so I have a quick follow-up on 3-nanometer profitability. And so Wendell has provided a pretty good insight about the dilution for 2024. But historically, a new node would take about 7 to 8 quarters to get to corporate average after mass production. I understand now corporate average gross margin is also higher. But any expectations that N3 will become in line with corporate average gross margin?

Jeff Su

Yes. So Sunny's question is looking at the 3-nanometer. Her question is really that with 3-nanometer and process complexities. Sunny, you're asking really kind of reach the corporate average over time?

Sunny Lin

Or is there a time line that you are expecting?

Jeff Su

Or and time line to reach.

Wendell Huang

Yes. Sunny, as I just mentioned, it's becoming more challenging for the leading nodes because of the process complexity increases a lot. It applies to N3. So it will be challenging for N3. And we actually mentioned that at the beginning of last year already, it will be challenging that for N3 to reach the corporate leverage in the - in 7 to 8 quarters time frame like before. Yes. But however, part of it is really because of the higher corporate margin that we currently have.

Sunny Lin

Got it. Thank you. My second question is on 2-nanometer. And so if we look at your target for 2-nanometers improvement over 3-nanometer in terms of speed and power, the upgrade seems to be actually less than 3-nanometer over 5-nanometer. So I wonder what's actually the implication of GA [ph] transition to cost versus performance. Is the target somewhat conservative? Or there is other technological challenges that we need to consider?

Jeff Su

Okay. Sunny, second was - it's really a third, but the question is on N2. She notes that the performance and the improvement seems to be less than 3-nanometer versus 5-nanometer. So could we talk more about that?

C. C. Wei

Yes, let me answer the question. Sunny you have a very good observation. Yes, you are right. As I compare node to node from 5 to 3, the improvement, it becomes less from 3 to 2. But let me point it out, usually, we are talking about the performance, the speed and also the density so that the geometry shrinkage.

Now we focus on the power consumption reduction, which is still a poor node as a performance because as time goes by more and more customer, really, they are increasing towards greater power efficiency. This is very important for the data center very important for the server. And that's what we are working on. So did I answer your questions, Sunny?

Sunny Lin

Got it. Thank you for the color. And good to know that you are on track to deliver a second generation of 2-nanometer in 2026. Thank you.

Jeff Su

Thank you, Sunny. Operator, let's move on to the next participant, please.

Operator

Next one to ask questions, Brett Simpson from Arete.

Brett Simpson

Yes. Thanks very much. And the first question is for C.C. I was interested in getting a read on the customer reception you're getting for the new variants for N3, I think you talked about N3P and 3x. Are customers still as focused on N3E or are you seeing a preference for them to migrate to the new variants such as N3P, N3X rather than the N3E. And this as a follow-on for AI, when do we actually start to see N3 adoption for N3? Thank you.

Jeff Su

Okay. So Brett's first question is looking at our 3-nanometer families and the continuous enhancements that we always have. He is asking what is the customer reception of N3P and N3X? How does this compare or cannibalize N3? And when do we expect AI related to adopt 3-nanometer family solutions?

C. C. Wei

Let me answer the last one first. AI application already adopting that our N3 technology node, we continue to improve our technology, as we always do. So we have an N3E, N3P, N3X, X is the actual performance that's for very high speed, very high let me say, performance computing for some of the CPUs application. But N3Es are widely accepted by all my customer and the design starting from N3E, and we help them for some of them go to the N3P. So all together, every version, every variation, there's a lot of customer engagement right now.

Jeff Su

Okay. Thank you, C.C.

Brett Simpson

And maybe just my second question for Mark. Mark, you were talking about the - building up the ecosystem in some of the overseas markets like the U.S., and you're talking about skill shortage. But can you talk about what you think the like-for-like wafer cost difference is to operate in the U.S. versus Taiwan?

I think your TSMC Founder talked previously about a 50% premium to operate in the U.S. Can you just quantify if that's - if it's likely to be that high. And then when would you expect the cash support from the U.S. Chips Act to be made available to TSMC? Thank you.

Jeff Su

Okay. So Brett, second question is for Chairman. He wants to know, in basically the cost gap, how big is the cost gap of fab in the U.S. versus in Taiwan. Founder has said 50% or more? Is it that high? And then concurrently, with the Chips Act, when or how and when do we expect to receive the incentives to support?

Mark Liu

Yes, Simpson. I think the Founder is right. I mean at this point, if we're using the current supply chain and labor cost, indeed, as that differences. However, we try to work with the U.S. administration. First of all, on the subsidy, cash subsidy and tax - investment tax credit, that is to cover the gap in the first 5 years approximately.

When the tool is depreciated, then the ecosystem becomes prominent. That is what is the material costs, chemical costs and the labor cost. And we are working with the - our supplier to set up some of the more efficient supply sites and to be lower, but the - and the U.S. administration has decided also to subsidize the supply - our suppliers. So that is still in the work. How much it can further decrease? I don't know. But I think either way, we will strengthen our pricing values and be able to keep the corporate profitability as we forecasted now.

Jeff Su

Thank you, Chairman. Okay. Thank you, Brett.

Brett Simpson

Thank you.

Jeff Su

In the interest of time, operator, we'll take questions from the last two participants in the queue, please.

Operator

Yes. Next one to ask question, Mehdi Hosseini from SIG.

Mehdi Hosseini

Yes. Thanks for taking my questions. I'm going to go back to the gross margin. And I think you highlighted the fact that for '23, you're still tracking to 53% gross margin on a $basis. That would imply that Q4 could be flat to up. And I just want to better understand how it's tracking. I'm not asking for a guide on Q4, but if 2023 gross margin is going to be 53% plus, so that would imply Q4 flat to up. Is that correct?

Jeff Su

All right, Mehdi. I think we'll let Wendell answer this question. But Mehdi is asking basically, are we saying that 2023 will be 53% and higher?

Wendell Huang

Mehdi, we're not giving our guidance beyond this third quarter. So we're not saying what Jeff just said. What we're saying is only some of the negative factors will affect the second half of the year. As to 53% and higher, that's a long-term growth margin target for TSMC.

Jeff Su

Yes. We did not provide a guidance for 2023 specifically, Mehdi. As Wendell just said, 53% higher is our long-term target, which we believe is achievable. Do you have a second question?

Mehdi Hosseini

Okay. Thank you. Yes. Your updated guide suggests that revenues in the second half would be up 10% to 12% versus the first half. Obviously, a step-up is lower than prior expectations. What I want to better understand is how should we think about continued inventory correction among your customer versus new product ramp by some of the other customers. Is there any way you can differentiate these two trends?

Jeff Su

Okay. Mehdi is asking with our full year guidance, it implies a more mild second half seasonality. So he wants to know how much strength of the new customer product launches is offset by continued inventory correction. Sort of if we can provide more color on that.

C. C. Wei

That's a tough question to answer. Mehdi, your observation is right. Our second half seasonality is more minor than previous years. But of course, we have N3 ramp up and for the new product launch. But what is the impact, how to separate them. No, I cannot share too much of the detail of that.

Jeff Su

Okay, Mehdi. Thank you. Operator, then let's move on to the last participant, please.

Operator

Yes. The last one on queue is Charles Shi from Needham.

Charles Shi

Thanks. Hi, thanks for squeezing me in. I have two questions. The first question is I want to ask about AI, especially around TSMC's monetization of AI trend. We did hear some commentary that for certain AI applications, TSMCs is selling chips for a few hundred bucks, but TSMC customers can actually sell for 10 bucks, thousands of bucks to their end customers. So I mean, some investors I spoke with really still – it pain them to see TSMC to create an advanced technology to probably give the greater value than this.

So the question really is how does TSMC think about maybe a monetization going forward for the capability to produce all these AI chips. And really I want to tie back to one thing management mentioned in the prepared remarks, the AI growth, 50% CAGR, how much of that is volume? And how much of that could be the pricing driven IN terms of TSMC expected the growth over the next few years in areas? Thank you.

Jeff Su

Okay. Charles, his question. First is on AI. Again, basically, he's asking about monetization or capturing value, let's say. He notes that TSMC, we may be selling chips for a few hundred dollars, but our customers are able to sell it for tens of thousands or even more. So is TSMC giving away too much of the value? Can we better sell our value or monetize to capture greater value with the AI trend?

C. C. Wei

Well, Charles, I used to make a joke on my customers say that I [indiscernible] a few hundred dollars of a chip and then he sold it back to me with $200,000. But let me say that, we are happy to see customers doing very well. And if customers do well, TSMC does well. And of course, we work with them and we share our value to them. And fundamentally, we want to say that we are able to address and capture a major portion of the market in terms of a semiconductor component in AI. Did I answer your question?

Charles Shi

Yes. What about the part about 50% CAGR, how much of that is volume? And should we expect some pricing element in that, the long-term growth?

Jeff Su

Yes. So the second part is about close to 50% CAGR for AI - sorry, server with AI processor. How much of that is volume? How much of that is price?

C. C. Wei

We cannot separate out, but let me share with you again, we talk to the customers because we have a major share of all the leading-edge technology node. So we know that we can make our judgment and so we forecast a 50% CAGR. How much of that is on the front end, back end or others? I am not able to share with you about it. But let me assure you that TSMC is going to capture a major portion of the market in terms of semiconductor component.

Jeff Su

Okay, Charles?

Charles Shi

Thank you. Can I ask you a second question?

Jeff Su

Last question.

Charles Shi

Yes, no problem. Last one. May I ask about the CapEx. I think I heard a comment that maybe some window about our dollar amount. CapEx stock is going to level up from here. And I think the management used to point us analysts to look at the 2010 to 2013 period with a high capital tenancy. CapEx actually went up $3 billion, $4 billion per year to 10. And actually, after that, TSMC CapEx did a level off around $10 billion level for roughly 5 years until 2019. By telling us the CapEx is probably going to level off, are you telling us or are you alluding to maybe there will be some steady state CapEx numbers going forward, maybe starting from '24 or '25, around NT30 billion-ish [ph] level. That's just a clarification on that comment to level it up. Thank you.

Jeff Su

Okay. So Charles, second question is on our CapEx. He wants to know capital spending starting to level off. I think Wendell said in the next several years. So not any specific, but what does that mean? Is it going to stay around the 30-some level? Or what does that mean by spending leveling off?

Wendell Huang

Yes. The - Charles, as I mentioned in the past few years, our CapEx increased dramatically from NT10 billion to NT36 billion last year. As we start to harvest those investments, the increase in CapEx will be slower than before. That's what I mean by leveling off.

Jeff Su

Okay. All right, Charles.

Charles Shi

Okay. Got it.

Jeff Su

Okay. Thank you.

Charles Shi

Yes, thank you.

Jeff Su

Okay. Operator, this concludes our Q&A session. Before we conclude today's conference, please be advised that the replay of the call will be accessible within 30 minutes from now. The transcript will become available 24 hours from now, both of which you can be find and available through TSMC's website at www.tsmc.com. So thank you for joining us today. We hope everyone continues to stay well. Have a good rest of the summer, and we hope you will join us again next quarter. Goodbye, and have a good day.