Taiwan Semiconductor Manufacturing Co Ltd (NYSE:TSM) Q2 2024 Earnings Conference Call July 18, 2024 2:00 AM ET
Company Participants
Jeff Su - Director, IR
Wendell Huang - SVP, Finance & CFO
C. C. Wei - Vice Chairman & CEO
Conference Call Participants
Gokul Hariharan - JPMorgan Chase & Co.
Charlie Chan - Morgan Stanley
Bruce Lu - Goldman Sachs Group
Brett Simpson - Arete Research Services
Charles Shi - Needham
Laura Chen - Citigroup
Sunny Lin - UBS
Arthur Lai - Macquarie
Brad Lin - Bank of America Merrill Lynch
Jeff Su
Good afternoon, everyone, and welcome to TSMC's Second Quarter 2024 Earnings Conference and Conference Call. This is Jeff Su, TSMC's Director of Investor Relations and your host for today.
Today's event is being webcast live through TSMC's website at www.tsmc.com, where you can also download the earnings release materials. If you are joining us through the conference call, your dial-in lines are in listen-only mode. The format for today's event will be as follows.
First, TSMC's Senior Vice President and CFO, Mr. Wendell Huang, will summarize our operations in the second quarter 2024, followed by our guidance for the third quarter 2024. Afterwards, Mr. Huang and TSMC's Chairman and CEO, Dr. C.C. Wei, will jointly provide the Company's key messages. Then, we will open both the floor and the line for the Q&A session.
As usual, I'd like to remind everybody that today's discussions may contain forward-looking statements that are subject to significant risk and uncertainties, which would cause actual results to differ materially from those contained in the forward-looking statements. Please refer to the safe harbor notice that appears in our press release.
And now, I would like to turn the microphone over to TSMC's CFO, Mr. Wendell Huang, for the summary of operations and the current quarter guidance.
Wendell Huang
Thank you, Jeff. Good afternoon, everyone. Thank you for joining us today. My presentation will start with the financial highlights for the second quarter of 2024. After that, I will provide the guidance for the third quarter 2024.
Second quarter revenue increased 13.6% sequentially in NT, or 10.3% in U.S. dollars, as our business was supported by strong demand for our industry-leading 3 and 5 nanometers technologies, partially offset by the continuous smartphone seasonality. Gross margin increased 10 basis points sequentially to 53.2%, mainly reflecting cost improvement and a more favorable foreign exchange rate, partially offset by the margin dilution from N3 ramp.
Due to the operating leverage, total operating expense accounted for 10.5% of net revenue, as compared to 11.1% in the first quarter. Thus, operating margin increased 0.5 percentage points sequentially to 42.5%. Overall, our second quarter EPS was 9.56 NT, and ROE 26.7%.
Now, let's move on to revenue by technology. 3-nanometer process technology contributed 15% of wafer revenue in the second quarter, while 5-nanometer and 7-nanometer accounted for 35% and 17% respectively. Advanced technology, defined as 7-nanometer and below, accounted for 67% of wafer revenue.
Moving on to revenue contribution by platform, HPC increased 28% quarter-over-quarter to account for 52% of our second quarter revenue, surpassing 50% for the first time. Smartphone decreased 1% to account for 33%. IoT increased 6% to account for 6%. Automotive increased 5% to account for 5%, and DCE increased 20% to account for 2%.
Moving on to the balance sheet, we ended the second quarter with cash and marketable securities of 2 trillion NT, or $63 billion US dollars. On the liability side, current liabilities increased by 23 billion NT, mainly due to the increase of NT$16 billion in accounts payable. Long-term interest bearing debt increased by NT$9 billion, mainly as we raised NT$12 billion in corporate bonds. On financial ratios, accounts receivable turnover days decreased by three days to 28 days. Days of inventory decreased by seven days to 83 days, primarily due to higher N3 wafer shipment.
Regarding cash flow and CapEx, during the second quarter, we generated about NT$378 billion in cash from operations, spent NT$206 billion in CapEx, and distributed NT$91 billion for third quarter '23 cash dividend. Overall, our cash balance increased NT$101 billion to NT$1.8 trillion at the end of the quarter. In US dollar terms, our second quarter capital expenditures total $6.36 billion.
I've finished my financial summary. Now let's turn to our current quarter guidance. Based on the current business outlook, we expect our third quarter revenue to be between $22.4 billion and $23.2 billion US dollars, which represents a 9.5% sequential increase, or a 32% year-over-year increase at the midpoint. Based on the exchange rate assumption of $1 US dollar to NT$32.5, gross margin is expected to be between 53.5% and 55.5%. Operating margin between 42.5% and 44.5%. This concludes my financial presentations.
Now let me turn to our key messages. I will start by talking about our second quarter '24 and third quarter '24 profitability. Our second quarter gross margin was 53.2%, slightly ahead of the high end of our guidance, mainly as we saw a higher than expected overall capacity utilization rate as compared to our forecast three months ago. We have just guided our third quarter gross margin to increase by 1.3 percentage points to 54.5% at the midpoint. This is primarily due to the higher overall capacity utilization rate in the third quarter and better cost improvement efforts, including productivity gains, partially offset by continued dilution from N3 ramp up, N5 to N3 tool conversion costs, and higher electricity prices in Taiwan.
Excluding the impact of foreign exchange rate, of which we have no control over, and factoring in the margin impact from our global manufacturing footprint expansion plans, we continue to forecast a long-term gross margin of 53% and higher is achievable.
Next, let me talk about our 2024 capital budget. Every year our CapEx is spent in anticipation of the growth that will follow in the future years, and our CapEx and capacity planning is always based on the long-term market demand profile. As the strong structural AI related demand continues, we continue to invest to support our customers' growth. We are narrowing the range of our 2024 capital budget to be between $30 billion and $32 billion as compared to $28 billion to $32 billion previously.
Between 70% and 80% of the capital budget will be allocated for advanced process technologies. About 10% -- 20% will be spent for specialty technologies, and about 10% will be spent for advanced packaging, testing, mask making, and others. At TSMC, a higher level of capital expenditures is always correlated with the higher growth opportunities in the following years.
Now, let me turn the microphone over to C.C.
C. C. Wei
Thank you, Wendell. Good afternoon, everyone. First, let me start with our near-term demand outlook.
We concluded our second quarter with revenue of U.S. dollar $20.8 billion, above our guidance in U.S. dollar terms. Our business in the second quarter was supported by strong demand for our industry-leading 3-nanometer and 5-nanometer technologies, particularly offset by continuous smartphone seasonalities.
Moving into third quarter 2024, we expect our business to be supported by strong smartphone and AI-related demand for our leading-edge process technologies. Looking at the full year 2024, we forecast the overall semiconductor market excluding memory to increase by about 10%, which is unchanged from our forecast three months ago. At this time, we would like to expand our original definition of foundry industry to Foundry 2.0, which also includes packaging, testing, mask making, and others and all IDM, excluding memory manufacturing.
We believe this new definition better reflects TSMC's expanding addressable market opportunities in the future. However, I want to emphasize here that TSMC will only focus on the most advanced backend technologies which help our customers in leading-edge products. Under this new definition, the size of the foundry industry was close to $250 billion in 2023, as compared to $115 billion under the previous definition.
With our new definition, we forecast the foundry industry growth to be close to 10% year-over-year in 2024. TSMC's share of the foundry industry, under our new definition, was 28% in 2023, supported by our strong technology leadership and broader customer base, we expect this one to further increase in 2024. Over the past three months, we have observed strong AI and high-end smartphone related demand from our customers, as compared to three months ago, leading to increasing overall capacity utilization rate for our leading-edge 3-nanometer and 5-nanometer process technologies in the second half of 2024. Thus, we continue to expect 2024 to be a strong growth year for TSMC.
We are raising our four-year guidance and now expect our 2024 revenue to increase slightly above mid-20s percent in US dollar terms. Next, I will talk about TSMC's capacity planning process and investment disciplines. This is important, especially when we have such high forecasted demand from AI related business.
TSMC's mission is to be the trusted technology and capacity provider for the global logic IC industry for years to come. The continual surge in AI related demand supports a strong structural demand for energy efficient computing. As a key enabler of AI applications, the value of our technology position is increasing as customers rely on TSMC to provide the most advanced process and packaging technology at scale in the most efficient and cost-effective manner.
As such, TSMC employs a disciplined framework to address the structural increase in the long-term market demand profile underpinned by the industry megatrend of AI, HPC, and 5G. We work closely with our customers to plan our capacity. We also have a rigorous and roll-out system that evaluates and judges market demand from both a top-down and a bottom-up approach to determine the appropriate capacity to build.
Our capital investment decisions are based on four disciplines, that is, technology leadership, flexible and responsive manufacturing, retaining customers' trust, and earning a sustainable and healthy return. To ensure a proper return from our investment, both pricing and cost are important. TSMC's pricing strategy is strategic, not opportunistic to reflect the value that we provide.
Today, we are investing heavily in leading-edge specialty and advanced packaging technologies to support our customers' growth and enable their success. If customers do well, TSMC should do well. For example, we are happy to see many of our customers' structural profitability improving in these past few years. At the same time, we face rising cost challenges due to increasing process complexity, a leading load, higher electricity costs in Taiwan, global fiber expansion in higher cost regions, and other cost inflation challenges. Therefore, we will continue to work closely with our customers to share our value. We will also work diligently with our suppliers to deliver on cost performance.
We believe such actions will help TSMC earn a sustainable and healthy return, so that we can continue to invest in technology and capacity to support our customers' growth and fulfill our mission as a trusted foundry partner, while delivering profitable growth for our shareholders.
Finally, I'll talk about our N2 status and A16 introduction. Our 2-nanometer and A16 technologies lead the industry in addressing the insatiable need for energy-efficient computing, and almost all the AI innovators are working with TSMC.
We expect the number of the new tape-outs for 2-nanometer technologies in its first two years to be higher than both 3-nanometer and 5-nanometer in their first two years. N2 will deliver full load performance and power benefit, with 10 to 15 speed improvement at the same power, or 25% to 30% power improvement at the same speed, and more than 15% chip density increase as compared with the N3E.
N2 technology development is progressing well, with device performance and yield on track or ahead of plan. N2 is on track for volume production in 2025 with a ramp profile similar to N3. With our strategy of continuous enhancement, we also introduce N2P as an extension of our N2 family. N2P features a further 5% performance at the same power or 5% to 10% power benefit at the same speed on top of N2. N2P will support both smartphone and HPC applications, and volume production is scheduled for the second half of 2026. We also introduce A16 as our next nanosheet-based technology, featuring Super Power Rail, or SPR, as a separate offering.
TSMC's SPR is an innovative, best-in-class backside power delivery solution that is forcing the industry to incorporate another backside contact scheme to preserve gate density and device with flexibility. Compared with N2P, A16 provides a further 8% to 10% speed improvement at the same power, or 15% to 20% power improvement at the same speed, and additional 7% to 10% chip density gain. A16 is best suited for specific HPC products with complex signal routes and dense power delivery network.
Volume production is scheduled for the second half of 2026. We believe N2, N2P, A16, and its derivative will further extend our technology leadership position and enable TSMC to capture the growth opportunities way into the future.
This concludes our key message, and thank you for your attention.
Question-and-Answer Session
A - Jeff Su
Thank you, C.C. Thank you, Wendell. This does conclude our prepared remarks. Before we begin the Q&A session, I would like to remind everybody to please limit your questions to two at a time, to allow all the participants an opportunity to ask their questions.
Questions we will take both from the floor and from the call. Should you wish to raise your question in Chinese, I will translate it to English before our management answers your question. [Operator Instructions] Now we will begin the Q&A session, I would like to take the first few questions from the floor, then we will go on to the call. So let's begin. The first question we please take from Gokul Hariharan from JP Morgan. Thank you.
Gokul Hariharan
Thanks, Jeff. Good afternoon, C.C., and good afternoon, Wendell. Thanks for giving us the picture in terms of how you are planning future capacity. Just on AI accelerator and related capacity, both front end and advanced packaging, clearly every customer is queuing up at TSMC for capacity. I think last time we talked about this maybe a couple of quarters back, C.C., you mentioned, we expect to see supply to kind of reach balance, supply demand to reach balance by end of this year. Just wanted to see what is your current remark? How do you think about supply demand balance for AI accelerator and CoWoS advanced packaging capacity?
And I think in your symposium you talked about 60% CAGR, component growth for CoWoS capacity in the next four, five years. So, could you talk a little bit about how much capacity for CoWoS would you be planning to build next year as well? Like last year you said you're going to be doubling the capacity this year. Now that we are in the middle of this year, maybe can we get a view on what is the capacity expansion for next year? That's my first question. Thank you.
Jeff Su
Okay. Gokul, all right. For the benefit of the audience online and in-person, please allow me to kind of try to summarize your question. So Gokul's question, first of all, he understands and appreciates TSMC's discipline framework in terms of looking at how to build capacity. His question is that it seems that everyone today, AI accelerators and advanced packaging is queuing at TSMC to ask for capacity. So his question is, when do we, C. C. expect supply demand to reach a balance both for the accelerator side and then for the CoWoS. At the symposium, we said CoWoS capacity will grow at a 60% CAGR the next few years. He also wants to know what are we planning to build or increase for 2025 CoWoS?
C. C. Wei
Gokul, I also try to reach the supply and demand balance, but I cannot today. The demand is so high, I have to work very hard to meet my customers' demand. We continue to increase, I hope sometime in 2025 or 2026 I can reach the balance. You're talking about the CAGR or those kind of increase of the CoWoS capacity. Now it's out of my mind. We continue to increase whatever, wherever, whenever I can. Okay. The supply continues to be very tight, all the way through probably 2025 and I hope it can be eased in 2026. That's today's situation.
Gokul Hariharan
Any thoughts on next year capacity? Are you going to double your capacity again next year for CoWoS?
C. C. Wei
The last time I said that, this year I doubled it, right? More than double. Okay. So next year, if I say double, probably I will answer your question again next year and say more than double. We are working very hard, as I said. Wherever we can, whenever we can.
Gokul Hariharan
Okay, thank you. My second question is regarding gross margins. I think second half guidance already seems to be better than what originally we were thinking, that gross margin could drop in second half, but it looks like it's actually going up. And it looks like a lot of the headwinds on gross margin is coming in this year. So, how should we think about gross margin looking forward for TSMC? Are we going to get back to the high 50%, 60% gross margin that we saw in 2022? Given that you got, you're selling more of your value, you have some of the entry tailwinds in terms of yield improvement coming through.
Into that, I will also ask, how should we think about impact of subsidies and ITC credits as you start ramping your overseas locations? How does that impact cost and gross margin? Because there's also some subsidies coming in, and currently TSMC is mostly talking about gross CapEx and gross spend?
Jeff Su
Okay, so let me summarize Gokul's second question, it's around gross margin and profitability. He notes second half '24 gross margin seems to be better than the expectation. So his question is really, how should we think about gross margin in the next several years? He notes, you know, as we said, we will sell our value and the dilution of entry will gradually reduce. So, where can the gross margins go back to a high 50% or 60% that kind of level that we saw a few years ago in 2022? Maybe that's the first part of his question. I'll stop here, then I'll get to the second.
Wendell Huang
Sure. Gokul, let me share with you some of the puts and takes on gross margin 2025 and a little bit beyond that. You already talked, there are positives and there are negatives. You already mentioned positive will be a decreasing dilution from N3. We're selling our value and we continue to drive down our cost, increase the productivity. That is, we are very good at that.
On the other hand, let's use N5 conversion to N3 as an example. We are not ruling out the possibility of further converting more N5 to N3 because we're seeing very strong demand for N3. If we decided to do that, of course, there will be a negative impact on the year that we do that, but in the future years, that will be beneficial. We continue to face cost challenges, inflation cost challenges, including electricity prices, et cetera. And also, we are beginning the production of our overseas fab, two overseas fabs next year, the Phase 1 of Arizona fab and Phase 1 of the Kumamoto fab.
We expect that the overseas fabs will dilute our gross margins by -- between 2 to 3 percentage point next year and in the next several years. So those are the puts and takes to give you the concept. However, we've taken all that into considerations with our efforts in managed the cost gap, especially between the overseas fab in Taiwan. We're repeating and confident to say that 53% and higher gross margin is achievable. So I think that's the first part of your question.
Gokul Hariharan
Yes, that's right.
Jeff Su
And then maybe also just Gokul asked, if it's possible to get back to the high 50%, 60% level that we saw in 2022?
Wendell Huang
Yes, if we have a very high utilization rate, everything else stays the same, possible.
Jeff Su
Okay. And then the second part of his question was, what is the impact from the different government incentives including the CHIPS Act, ITC credits in the U.S., et cetera, through the financials and also I think partly gross CapEx and net CapEx? Thank you.
Wendell Huang
Generally speaking, when subsidies are received, then you see that on the cash flow statement. It will be used to offset the asset value that will be on the balance sheet. When this fab begins to production, the P&L impact will come in. So generally speaking, it's like that. Different government has different approach in providing the grants. So that's a different story. But you can look at our financial statements. There will be actual subsidy received in the previous quarter and previous year. For example, 2023, we receive a total subsidies of slightly higher than $1.5 billion US equivalent. And we receive that mainly in Japan.
Jeff Su
Okay. All right. Great. Thank you. Let's move on. We'll take the next one from Charlie Chan from Morgan Stanley and then we'll go to Bruce Lu from Goldman. Thank you.
Charlie Chan
Thanks. Hi, C.C., Wendell and Jeff. Great to see you in person again.
So my first question is really about your progress of selling the value. I'm not sure what's the progress. And do you think for next year your leading-edge capacity is going to be in shortage? Is that's the case, whether that increase your chance to sell more value to your customers? Thank you.
Jeff Su
Okay. So Charlie's first question is around pricing. And he wants to understand the progress of, I guess, selling our value. And also in next year, looking at next year, particularly for the leading-edge nodes, do we expect that in terms of the demand to be very full?
C. C. Wei
Charlie, this kind of pricing strategy is very strategic. You are asking me about the status. So far, so good. And this is an ongoing and continuous process, we are continuing to sell our value. And by the way, my customers are doing very well also. You knew that. So we should do well also.
Charlie Chan
So that is actually my follow-up question on this first question. For different segments, for example, HPC customers are doing very, very well. But for smartphone customers, probably more sensitive to the cost. Do you expect that kind of difference of value increase for different customers, even at the same node?
Jeff Su
So Charlie is asking, how will we do the pricing? Will it be different between, for example, an HPC customer versus a smartphone customer at the same node? And also his question earlier was, do we expect the demand for the leading nodes to be very high next year?
C. C. Wei
Since the pricing is strategic, so it won't be flat for every product sector. So it will be different. That's all I can share with you. And all my customers, they are looking for leading-edge capacity for the next few years and we are working with them. And so far, we try our best to support them, both in pricing and in capacity.
Charlie Chan
Thank you. And second topic is definitely over the past two days there’s a geopolitical risk? So, Mr. Donald Trump talked about maybe a few years ago, right, Taiwan/TSMC took a 100% chip business from U.S. So congrats on the positive high market share. However, the concern is growing, right, that the U.S. continues to depend on our Island TSMC and the chip production. So, our question is for shareholders, right, how TSMC is going to mitigate this potential geopolitical risk? For example, whether you are going to further expand your U.S. capacity or even share the ownership, right, with the U.S. government? And maybe a technical question to Wendell, for today, right, if we are shipping a chip to the U.S. customers, do we need to pay for the U.S. tariff?
Jeff Su
Okay. Sorry. So Charlie's second question is around sort of overseas expansion and geopolitical risk. He notes the comments from former President Trump a few days ago that Taiwan semiconductor has taken 100% of the business. So his question is really how does TSMC plan to mitigate the geopolitical risk? Does this include expanding capacity overseas, particularly in the U.S.? Would we consider -- I think part of this question was some JV or joint investments, whether with government or whether with partners. And the last question, I think, was more for Wendell, about the tax or the tariffs, so to speak.
C. C. Wei
Okay, Charlie. So far, we did not change any of our original plan of expansion of our overseas fab. We continue to expand in Arizona, in Kumamoto and maybe future in Europe. No change to our strategy. We continue our current practice. You mentioned about the JV, No. Okay.
Wendell Huang
On the tariff, not that we know of. Normally, if there's an import tariff, the customers will be responsible for that, but no discussion, nothing.
Jeff Su
Okay. Thank you, Charlie. All right. We'll take the next question from Bruce Lu from Goldman Sachs in the front, then we’ll move online.
Bruce Lu
Thank you for taking my question. Alright, my question is that, why don't we take up our gross margin or structural profitability target. I mean TSMC has been saying for selling your value for past couple of quarters without changing the margin target, i.e., most likely you are passing through all the costs. But please, I can recall in 2021, I mean, TSMC do raise the gross margin target by them because to support the future growth with more R&D, as the technology continues to be enhanced and more difficult and one of your customers at this is supportive that to suggest that you should charge even more. So my question is that, why is that you don't raise your gross margin target when you are trying your -- when you try to sell your value, which we believe we deserve much higher value.
Jeff Su
Okay. So thank you, Bruce. So Bruce's first question is about profitability and value. Bruce seems to agree that TSMC is providing value to our customers. He also notes in 2021, indeed, a few years ago, our gross margin target, long-term gross margin target was about 50%, and we're able to increase that to 53% and higher. So his question is really with everything that is going on today with the value of our technology, enabling our customers more and more, why doesn't TSMC increase or revise up our long-term gross margin target from the current 53% and higher? Is that the essence?
C. C. Wei
Bruce, thank you for recognizing TSMC's value. I'm working with our customer. As I said, this kind of pricing is strategic. And certainly, we want to sell our value. Changing the target in -- at this moment, I think I would like to emphasize 53% and higher, please put more attention to and higher. The number, I'm not going to change it at this time. When I have a more conversation with my customer and discuss with them, and I probably will give you and the higher portion, okay? Thank you.
Bruce Lu
Thank you. My next question is for advanced packaging. So management used to mention that Advanced Packaging margin was lower than the corporate average, but with higher ROICs. But given the reason progress for the CoWoS and everything, do we see a much better profitability for the CoWoS? And given that it's so difficult to expand the capacity, are you planning to work with more partners to increase your CoWoS supply, which will start your current supply and demand issues?
Jeff Su
Okay. Thank you, Bruce. So Bruce's second question is around advanced packaging. Part of it is in terms of the profitability. He notes we used to say, which is true, it's lower than the corporate average profitability but can earn a similar return or ROE, but his question is now with more and more CoWoS demand in greater scale, is the profitability of advanced packaging, I think, approaching or at or above the corporate average? And also, given the tight supply, would we consider to work with more partners to help increase the capacity for CoWoS to support our customers' growth.
C. C. Wei
You are right, for advanced packaging, the gross margin used to be much lower than the corporate average. Now it's approaching corporate average. We are improving it because of scale of the economics, and we put a lot of effort to reduce our cost. So gross margin is greatly improving in these two years.
As for the working with OSAT partners, yes, we are doing it. Because of -- I just answer the question whether the CoWoS capacity is now or not, is not enough. And in great shortage, and that limited my customer’s growth. So we are working with our OSAT partner and try to give more capacity to my customer, so that they can grow healthily. And so the TSMC's wafer can be sold healthily. Okay.
Jeff Su
Okay. Thank you, C.C. Thank you, Bruce. Operator, can we move to the first participant online for their -- his or her questions, please?
Operator
Yes. First one, we've got Brett Simpson, Arete.
Brett Simpson
Yes. Thanks very much. My question was really about your capacity plans for the next nodes, at N2, including 16. We're hearing that AI chip makers are looking to migrate more aggressively from N minus 1 to the leading-edge, particularly due to backside power because they're trying to lower their power budgets going forward. So my question, can you support this move? And if so, should we be expecting N2, A16 to be structurally a much bigger nodes, than we've seen in the past few nodes? Thank you.
Jeff Su
Okay. Brett, thank you. So Brett's first question is on capacity planning, particularly at the leading-edge N2 and A16. So he notes rightly that AI customers are migrating aggressively from N minus 1 in the past to the most leading node. He notes particularly A16 driven by the interest in backside power. So his question is, can we support this move in terms of capacity to support the customers and also whether thus N2 and A16 will be a much bigger node than our nodes in the past?
C. C. Wei
Brett, you are right. All the people want to move into kind of a power-efficient mode. And so they are looking for the more advanced technology so that they can save power consumption. And so a lot of my customers want to move into N2, N2P, A16 quickly. We are working very hard to build the capacity to support them. Today, it's a little bit tight, not a little bit, actually, today is very tight. I hope in next year or the next two years, we can build enough capacity to support this kind of demand. Today, yes, we are working hard to support them. And enough, not yet, but we are working hard to get it.
Jeff Su
Does that answer your first question, Brett?
Brett Simpson
Okay. Thank you. Yes, that's great. Thank you, C. C. Wei. My follow-up question was for Wendell. I wanted to just dig into the gross margin dilution from N3, where is that at today? And does the introduction of N3E structurally improve your N3 returns? I guess N3 is less capital intensive, there's less EUV layers, so I'm keen to understand that this drives better economics for TSMC, particularly as you start to ramp more entry capacity in the second half of this year. Thank you.
Jeff Su
All right. Thanks, Brett. So Brett's second question is on the gross margin dilution from N3. He notes that N3 uses less EUV layers, less capital intensity. So his question is, as we ramp N3 more and more, does N3E structurally improve the returns and gross margin of N3 as a whole.
Wendell Huang
Okay. Brett, we don't break it down between the different nodes within the family. But I can share with you, overall speaking, as we said before, N3E takes a longer while to reach the copper mark. In the past, it was about 8 to 10 quarters. For N3, we're looking at 10 to maybe 12 quarters. But it is improving, and we expect it to continue to improve.
Jeff Su
Okay. Thank you, Brett. Operator, let's take the next set of questions from the next participant on the call, please.
Operator
Next one to ask a question, Charles Shi from Needham. Go ahead, please.
Charles Shi
Yes, thanks for taking my questions. Maybe the first one, just want to follow up. Wendell, I think I heard you talking about that potentially more N5 to N3 conversion. Maybe what you're trying to do right now, the conversion. I just want to understand the overall philosophy here because I think in the past, the TSMC does do this node-to-node conversion quite actively, let's say, 10-nanometer to 7-nanometer, probably even earlier 20-nanometer to 16-nanometer. And I think you told us basically treat 10 and 7 as one large node, 20 and 16 as one large node.
Should we start to really think about maybe 5 and 3 are just one big node and maybe more conversion, we should think about more of the N3 capacity growth will come from conversion going forward less from the greenfield investment? That's the first question.
Jeff Su
Okay, Charles. So Charles first question is really look at our conversion strategy. He notes that we have always talked about building in tool commonality to provide us flexibility. We have done so in the past that certain nodes like 20 and 16, 10 and 7. So his question is really we had said that we potentially convert more N5 tools to support the strong demand for N3 capacity. So his question is should we, investors, and we'll start to think about N5 and N3 as one big node?
Wendell Huang
Right. You mentioned about 12 and 16, they are a big foundry. 7 and 10 are a big family. But 5 and 3 are not a big family in our definitions. At the same time, there are node-to-node two commonality in TSMC is pretty high. So for 5 and 3, the commonality of tools is over 90%, and these two nodes are adjacent. They're all in Tainan Science Park. And so it's very easy to do the conversions. Did I answer your questions?
Charles Shi
Yes. May I ask a second question?
Jeff Su
Certainly.
Charles Shi
Thanks. Maybe a question about CoWoS. I think I heard C.C., you said maybe there's some technical difficulty on my side. I just want to clarify, maybe you may double the CoWoS capacity again in 2025. But a little bit more technical question, I do want to better understand the technology constraints because your customers seems to be migrating from CoWoS-S to the more advanced version CoWoS-L, CoWoS-R: and we learned that CoWoS-L-R does not require TSV, does not require a large silicon interposer, does that help at least to some degree, the capacity constraints you're facing on overall CoWoS, and does that help to maybe to achieve that goal of maybe getting to the supply/demand balance some point in 2025, 2026. That's a two-part question. Thank you.
Jeff Su
Okay, Charles. Is really on CoWoS. First, he would like to clarify, we said that CoWoS capacity is more than doubling in 2024. He said, did we say, is he correct to understand, we said it will double again in 2025. That's the first clarification. And then he would like to know as customers migrate from CoWoS-S to CoWoS-L and CoWoS-R solution, a lot of technical challenges or benefits -- changes, sorry, not challenges. Does it help alleviate the capacity constraints? And would that allow CoWoS to reach supply/demand balance in 2025? So I wanted to clarify and one on the different solutions.
C. C. Wei
Well, all right. Charles, you really know all the details of the technology. The CoWoS-R, CoWoS-S, CoWoS-L, blah, blah, blah. All these kind of things because of our customers' requirement. So even the same customer, they have different approaches for their different products.
When I say that we doubled the capacity, this is some in or the different version of the CoWoS together. Which portion is really double, which portion is much more than the other one, not going to share with you because this is related to my customer demand. So from last year to this year, we have more than doubled. And as I said, from this year to next year, we want to double again or probably we want to more than double again. But still, I have to work with our OSAT partner to increase the overall supply to support my customer. Whether that this kind of different version of the CoWoS will give me some flexibility today, yes, and no, because different version has a different tool set. But in common, some of the tool can be used by all the CoWoS, okay, but different versions have a different demand.
Jeff Su
Okay. Thank you, C.C. Thank you, Charles. We'll come back to the floor for the next two questions, please. We'll take the first one from Laura Chen from Citigroup, and then we'll go to Sunny Lin from UBS.
Laura Chen
Thank you, Jeff. Thank you for taking my question. My first question is also on the advanced node. I remember C.C., you mentioned earlier that every clients are now engaged with you on the 2-nanometer migration. So I'm just wondering that when we enter in maybe 2026, the second year, can we expect that the revenue contribution initially will be larger than what we had comparing to N3. And also wondering that since the performance is much better. So can we expect the dilution period will also be shorter than N3?
Jeff Su
Okay. So Laura's first question is about N2 basically that almost every customer is engaging with TSMC on 2-nanometer technology. So her question is, do we expect the revenue contribution from N2 in 2026, therefore, to be larger than compared to N3 at a similar point in time of the ramp and also correspondingly with the N2 margin dilution be less or better than N3, basically?
C. C. Wei
I will give this kind of money's question to the CFO.
Wendell Huang
All right. Laura, the revenue, yes, it's going to be bigger, okay? Gross margin dilution, it will be faster to reach corporate average.
Laura Chen
That's very clear and helpful. Thank you. And also my second question is also on the packaging side. So we know that last time we also discussed an edge AI will also benefit for TSMC in terms of the advanced nodes, the die areas. Just wondering that do you also see your edge AI device clients are moving to 3D IC or SoIC anytime in the next two years? Or before that happening, can we expect more clients on the smartphone side, they will also adapt maybe info first. Because so far, our understanding is that info only have one advanced one single client. I'm just wondering that if we see that more clients to move to on the edge AI side on advanced packaging? Thank you.
Jeff Su
Okay. So Laura, second question is very specific, but again, in regards to advanced packaging with more and more customers working on edge AI devices without -- well, being overly specific, but what does it mean or the implication for advanced packaging solutions that we expect in the next two years to see these edge AI customers start to use SoIC or 3D IC particularly smartphone? Will they still be using info? Or will they also consider these solutions as well. Is that correct, Laura? Okay.
C. C. Wei
Well, very technical questions. Let me share with you as my customer moving into 2-nanometer or N16, they all need to probably take in the approach of chiplets. So once you use your chiplets, you have to use in advanced packaging technologies. On the edge AI, for those kind of smartphone customer, as compared with the HPC customers, HPC is moving faster because of bandwidth concerns, latency of footprint or those kind of thing.
For smartphone customer, they need to pay more attention to the footprint as well as the functionality increase. So you observe my big customers taking the info first and then for few years, nobody catch it up. They are catch it up okay?
Jeff Su
Okay. Thank you, Laura. We'll take the next question from Sunny Lin from UBS, and then we'll go back to the call.
Sunny Lin
Thank you, Jeff. Good afternoon, C. C. and Wendell, thank you for taking my question. So my first question is on your business opportunities for smartphone and PC. Last few years, both were like x [ph] growth for quite some time. And so how we should think about the units and silicon content for the coming two, three years? First part, a lot of questions on the tight supply 5 and 3-nanometer? And so are your customers engaging with you early on the planning into 2025 capacities for a better upgrade cycle?
And then for silicon content, recall a few years back when 5G just started to ramp are used to provide the silicon content expectations of 5G high-end and low-end smartphones, so I wonder at this point of time, if you have any estimates for AI for smartphone going to next two, three years?
Jeff Su
Okay. Several parts to Sunny's first question. She's looking at smartphone and PC. So the first part is she wants to know in terms of unit in silicon content, what is our expectation for smartphone and PCs in the next few years? N5 and N3 supply is very tight in terms of the capacity. Can -- do we have enough capacity to support a potential unit or upgrade cycle? And last but not least, she's asking us to quantify the silicon content per device per segment from edge AI?
C. C. Wei
That's a very long question. But let me answer the content first. AI is so hard. So that's right now everybody -- all my customers want to put their AI functionality into the edge devices and so the die size will be increased, okay? How much? I mean it's different from my customer-to-customers product. But basically, probably 5% to 10% die size increase will be a general rule. Unit growth, not yet, okay? Because we did not see kind of unit growth suddenly increased, but we expect this AI functionality was stimulated some of the demand to stimulate the replacement to be shorter. So in terms of unit growth that in a few years later, probably two years later, you will start to see a big increase in the edge device that's a smartphone and the PC.
Jeff Su
And will we have enough capacity to support?
C. C. Wei
That's the one I tried to avoid the answer. It's very, very tight, and we are working very, very hard to get enough capacity to support my customer from now all the way to next year to 2026.
Sunny Lin
Thank you, C. C. for the answer. So my second question is try to look at the demand profile from different perspectives. If we look back in 2021 or early 2022, backend demand was also pretty high. Customers were very aggressive on the demand forecast. Now looking at GenAI, obviously, the technology has lots of great potential, but a new technology also have lots of volatilities where you start to ramp. And so how are we managing the volatility of the demand? Why do you think this time around is different versus COVID period? How do we get comfortable with our capacity planning?
Jeff Su
Okay. Thank you, Sunny. So Sunny's second question, it goes back to TSMCs capacity planning and CapEx framework. So she notes, today generative AI-related demand is very strong, but she also notes a few years ago back in 2021 and '22, demand was also very strong. Many customers were also very positive or being on the future demand. And so today, with such strong generative AI demand, how does TSMC plan its capacity appropriately? How do we manage, I think your word was volatility? How do we manage the risk? Basically, I guess, of not overbuilding capacity in this type of environment?
C. C. Wei
I thought I explained that our capacity premium process, right, and the investment, we have, I put wording of discipline. That means we are not going to repeat the same kind of mistake that we have in 2021, 2022. Now this time, again, we look at the overall very big demand forecast for my customer. And so I look at it into actually the whole company with many people now examining and study that really is AI is so used for will be used by a lot of people or not. And we test our sales force inside TSMC, while using AI, we are using machine learning scale to improve our productivity, and we found out it's very useful.
And so I also in the line to buy my customer's product, and we have perform in the line, like I get no privilege, I'm sorry, but it's useful. And so I believe that this time, AI demand is more real than two or three years ago. That timing is because people are afraid of a shortage, and so automotive, everything, you name it, they are all in shortage.
This time, AI alone only AI alone. It will be a very useful tool for the human being to improve all the productivity in our daily life, be it in medical, industry or in any product, manufacturing industry or autonomous driving, everything you need the AI. And so I believe it's more real. But even with that, we also have a top-down bottom-up approach and discuss with our customers and ask them to be more realistic. I don't want to repeat the same kind of mistake two or three years ago, and that's what we are doing right now.
Sunny Lin
Great to know. Thank you very much.
Jeff Su
Okay. Thank you. Operator, can we move on to the next participant from the line, please? Okay. If not, then maybe we'll take the last two questions from the floor or one or two. Let's start here and then here. So we'll start with our third line from Arthur Lai from Macquarie.
Arthur Lai
Hi, C. C. and Wendell and Jeff. Thanks for taking my question. Arthur Lai from Macquarie. I used to cover the downstream tech and especially data center before. And so I want to ask C. C. about the SPR because I think this is very important from the data center perspective. So when you bring the new technology, you can save around 20% power. Can we also think about you can save the total systems power consumption by another20%? So is a big change. And from the customer you asked -- you spoke to, they can also you said the total cost of our own operation. So it becomes the more you buy, the more you sell. Yes, thank you.
Jeff Su
Okay. So Arthur's first question, he would like to understand more about Super Power Rail or our best-in-class backside power solution as it relates to data center demand. He knows as we said that it brings greater power efficiency from the chip level. His question without specific numbers, but what does the mean for the system level power consumption saving? What does it mean for our customers' ability in terms of total cost of ownership in terms of the power savings? And does it mean that the more you buy, the more you save?
C. C. Wei
The more you buy TSMC's wafer, the more you save. Yes. Sorry, I just want to -- I like my customer.
Your question, Arthur, you say that 20% sales in the chips power consumption does that directly reply to indicate that the system power consumption was reduced by 20%. Probably not because of the whole system including the connection, including the networking, including the processes of power consumption. So unless every component save 20%, then you can achieve 20%. But again, the accelerator or the CPU is a big portion of the whole system's power consumption. So even it is not 20%, it's a significant portion of it. And so that's why all my customers want to using the leading edge, and they are very aggressive to move into the 2-nanometer technology.
Arthur Lai
Thank you. So I also encourage company to do the right thing. So energy efficiency computing is definitely our goal for human beings. And so I also, I would like to give more color about, when you go into the A16 and when we expand the capacity, what do you think the biggest bottleneck would be?
Jeff Su
Okay. So Arthur, second question is in terms of A16, what would be the biggest bottleneck to expand our capacity of A16 to support our customers, if any?
C. C. Wei
We always say that when TSMC wants to expand the capacity, we need the land, we need the electricity, we need the talented people and so all the above. Okay?
Arthur Lai
Thank you, C. C.
Jeff Su
Okay. Thank you. And then in the interest of time, we'll take questions from the last participant on the floor, which is Brad Lin from Bank of America Merrill Lynch.
Brad Lin
Thank you, Jeff for taking my questions. So I have two questions. The first one would be on the, during the Computex. We obviously have seen quite some big tech companies announced that they are going to accelerate the launch cadence. So what's the implication to TSMC? Should that give TSMC a better visibility on the pipeline and also the capacity planning? And on the other side, so what are the major challenges that you might face with this Phase 3 cadence?
Jeff Su
Okay. So Brad's first question is that Computex recently, several companies announced their intention to accelerate their product cadence or product launches. So his question is, what does this mean implications to TSMC in terms of capacity planning in terms of supporting our customers, et cetera, et cetera. Is that right?
Brad Lin
Yes.
Jeff Su
Okay.
C. C. Wei
Well, we like this kind of a trend because of TSMC is very good at the leading-edge development. And so we -- actually, every product once they design it takes 1.5 years to 2 years. So we got this kind of message, but quite a long time ago. My customer announced it because they are so happy and so we are happy also because they want us to see our value. So I take that otherwise. But -- Gokul don’t laugh. Okay. So to answer your question, yes, we have been prepared. And not only because of in June, they announce it, we much earlier, we already discussed with them, and we prepare for these kind of changes.
Brad Lin
Got it. Thank you very much. So I would assume that would help us kind of sell the value easier. So the second question will be on the -- well, obviously, we also see the bigger footprint of the AI chips. So while there are quite some activities about fan-out panel-level packaging. So do you think that, that solution will be mentioned in the mid- to long run? Or does TSMC have any plan to do the related investment? Thank you.
Jeff Su
Okay. So Brad, second question is that, again, with AI-related chips that they're larger and larger die sizes. So his question is in terms of advanced packaging and specifically fan-out panel-level packaging. Is this something that TSMC is looking at or exploring to do? Would this be something for TSMC in the mid- to long term?
C. C. Wei
Yes. We are looking at this as kind of a panel level fan-out technology. But the maturity today is not yet, so I, personally, I would think it’s about at least three years later, okay? In this, within these three years, we don't have any very solid solution for a die size bigger than 10 times of the radical size. Today, we support our customer all the way to 5x, 6x chip size. I'm talking about the fuel size, the biggest fuel size. Three years later, I believe the panel fan-out will be -- start to be introduced and we are working on it.
Brad Lin
And we will be ready for it as well.
C. C. Wei
Of course.
Jeff Su
All right. Thank you, C.C. Thank you, Brad. Thank you, everyone. This concludes our Q&A session. Before we conclude today's conference, please be advised that the replay of the conference will be accessible within 30 minutes from now, and the transcript will become available 24 hours from now, both of which are going to be available through TSMC's website at www.tsmc.com.
So thank you, everyone, for joining us today. We hope everyone continues to stay well, and we hope you will join us again next quarter. Goodbye, and have a great day.